| Products > Test Equipment |
| Sencore LC102 & LC103 Capacitor & Inductor Analyzer |
| << < (19/20) > >> |
| glicos:
I have a Sencore LC102 Capacitor inductor analyzer. Working ok in terms of testing but theres always an annoying buzzer sound inside when i turn it ON. Anyone knows whats the propable cause. Thanks |
| coromonadalix:
could be some coil or xforer oscilations ? some schematics exists for the 102 ... |
| Mike Flosse:
Hello, Thanks for sharing all that valuable information. How can I get a copy of all your files? I would be very grateful. I have the chance to buy a used old Sencore LC103, but I cannot spend 2000$ If I am not able to calibrate it. Thanks a lot in advance Mike |
| coromonadalix:
go to ko4bb website everything is supposed to be there, search in sencore http://www.ko4bb.com/getsimple/index.php?id=manuals self calibrations as far as we know is impossible, you need some reference material and the software was not made public, an eevblog member was supposed to post here but in the end if you do not need an 1kv test you have plenty of bench lcrs who can do in serial or parallel tests and wont cost as much as the lc102 or 103, and some can be easily calibrated Sencore are in a special niche .... obsolete, still good if you find one in very good shape but way over priced |
| Mike Flosse:
Hello, Thanks a lot for the prompt answer. I checked carefully on the ko4bb website and I was not able to find the "C103 Final Cal" software to calibrate the LC103. Did any of you ever download that software? Any help will be much appreciated. Thanks again in advance Mike |
| Navigation |
| Message Index |
| Next page |
| Previous page |