Products > Test Equipment
XJW01 Auto LCR meter review ($120 bench top LCR meter)
<< < (5/26) > >>
dannyf:

--- Quote ---100KHz Version:
--- End quote ---

If you look at its PA0 / PA1 pins, that's where the magic happens - identical to my implementation on the ESR meter. They form a very effective synchronous detector.

No need to use those pesky analog switches.
BravoV:
Calibrating common handheld DMM at voltage or resistance is relatively easy with easily bought references, but for the inductor or capacitor at the inductance, capacitance or impedance part D, Q, Phase angle, ESR or DCR down to few mili ohm accuracy ?  :-//

Just wonder if the owner for these DIY type needs to "struggle" for the 1st time calibration to get to similar accuracy compared to their cheaper commercial counterpart ? In a hobbyist/enthusiast perspective of course.
JacquesBBB:
Dear Nctnico,

Can you tell me what  is the approximate weight of the XJW01 ?

I  consider buying one and I am interested in the postage fare.
Thanks

Jacques
wblackledg:
got mine today from ebay for $100 delivered.

The Good :  It came unbroken.

The Bad :  the chassis wasn't fit correctly.  I had to unscrew it, open it up then fit it back together. real cheese job in finally assembly.
The case is really cheap.  Seems you have to open it up to take the bindel off if you want.
It also came with a Euro AC plug. (not for US). I had to find an old PC plug, which seems to work
somebody took a soldering iron and melted 110v into the back. (I guess sharpies are in short supply? )  :-DD

I tested some high end audio Elan caps against it, and this crappy meter
http://www.ebay.com/itm/new-Digital-LCD-Capacitance-Capacitor-LCR-Meter-Tester-Multimeter-20mF-200pF-/271874301855?pt=LH_DefaultDomain_0&hash=item3f4cf89f9f

I have seemed to be closer to the spec uf than this thing did, but not by much.

Does anybody know of a way to calibrate this thing?

thanks.
wblackledg:

--- Quote from: JacquesBBB on December 17, 2014, 09:30:52 pm ---Dear Nctnico,

Can you tell me what  is the approximate weight of the XJW01 ?

I  consider buying one and I am interested in the postage fare.
Thanks

Jacques

--- End quote ---

weighs about as much as a computer keyboard, but smaller. if you really want I can try and give you the actual weight.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod