Products > Test Equipment
Yokogawa Bench Meters, Slim Pickings.
<< < (9/11) > >>
enut11:

--- Quote from: tinhead on November 16, 2015, 10:27:23 pm ---as i got asked for, here my collection of user manuals, service manuals and other things for some Yokogawa gears (755x, 756x, TC1xx, FG1x0, FG2/3xx)

http://1drv.ms/1BUD6Nv 

Afaik, the firmware 2.02 is the latest revision for 7551 and 7552 models, in case someone have newer version i would be happy to get a copy.

I'm looking as well for firmware (eprom dump) from 7561 and/or 7562 models.

--- End quote ---
...

Thanks very much tinhead. The 7552 User Manual is different in a lot of areas to the 7562 manual that I was using previously. Now makes setting up and calibrating my Yokogawa 7552 a lot easier.

enut11
tinhead:
btw., when you wish to know more about GPIB commands on 7551/2 check the 7555 user manual as well.
enut11:
Thanks for the tip tinhead.

Hi all
Just taken delivery of the DMM Check+ from the States. It is a precision voltage, current, resistance and frequency standard.

I will be testing the 7552 soon to see how it goes.

The Malone DMM Check+ is calibrated and guaranteed to hold the values for up to 6 months - see pix for more info.
enut11:
Some preliminary checks on the Yokogawa 7552 DMM as received using the Malone calibrated DMM Check Plus. Both instruments were allowed to warm up for about 1/2 hr before testing at 23 deg C.

Ref 5.0000v DC reads 4.9995 on 7552 (1 year spec is 0.008%)
Ref 4.999v AC reads 5.0115 on 7552 (1 year spec is 0.2%)
Ref 1.0001 mA DC reads 1.00073 on 7552 (1 year spec is 0.07%)
Ref 1.000 mA AC reads 1.0001 on 7552 (1 year spec is 0.5%)
Ref 100.028 ohm reads 100.028 on 7552 (1 year spec is 0.018%)
Ref 999.81 ohm reads 999.75 on 7552 (1 year spec is 0.015%)
Ref 9.9977Kohm reads 9.9964K on 7552 (1 year spec is 0.015%)
Ref 100.085 Kohm reads 100.078K on 7552 (1 year spec is 0.016%)

These numbers suggest that the 7552 is working well and generally within spec so I am happy to use it as-is.
nowlan:
I bought a 7555 from yahoo auctions via shipping agent. I had it sent via boat to see if they could handle larger items via sea freight etc. I was in no real hurry, but took much longer than expected.



I had hoped to do voltage conversion to 220v easily, but upon opening it up, is just a single transformer attached to side. Different from the 7552 photos earlier. I figured it would be similar to the other model which had hidden voltage selection. I do have a step down, I just need to find a US lead.

Managed to power it up at school, but didnt have means to test it easily. Some other time.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod