Products > Test Equipment
Yokogawa DL1740 battery replacement
(1/1)
mpavlica:
Hi guys

I have replaced battery on DL1740 Yokogawa, board is nice and clean, but it still reports error 907 - flat battery. All settings are stored, kept in RAM, but this message is still showing during startup, I guess that there is some service procedure to reset it.
Anyone knows how?


Thanks!
Inside21:
user manual says about it: quickly replace, or go to service center (page 3-7)
https://cdn.tmi.yokogawa.com/IM701730-01E.pdf
may be this oscill have 'load default settings' option? 
pages 16-6, 16-1....
press reset, and power up...
mpavlica:
Yeah, I did a replacement but I didnt know that reset function will fix batt fail test... Thanks for fix!
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod