Products > Test Equipment
Yokogawa DL1740 battery replacement
(1/1)
mpavlica:
Hi guys
I have replaced battery on DL1740 Yokogawa, board is nice and clean, but it still reports error 907 - flat battery. All settings are stored, kept in RAM, but this message is still showing during startup, I guess that there is some service procedure to reset it.
Anyone knows how?
Thanks!
Inside21:
user manual says about it: quickly replace, or go to service center (page 3-7)
https://cdn.tmi.yokogawa.com/IM701730-01E.pdf
may be this oscill have 'load default settings' option?
pages 16-6, 16-1....
press reset, and power up...
mpavlica:
Yeah, I did a replacement but I didnt know that reset function will fix batt fail test... Thanks for fix!
Navigation
[0] Message Index
Go to full version