Products > Test Equipment
ZYT GPSDO - Trimble guts
(1/4) > >>
kj7e:
Picked up one of the recycled Trimble GPSDO units from ZYT_GPS eBay seller;
https://www.ebay.com/itm/Trimble-LCD-GPSDO-10MHz-1PPS-OCXO-GPS-Disciplined-Oscillator-2019-5-8/312599997545?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Very please with it, not had much time to play with it, but it agrees with my BG7TBL NEO-M8T modded GPSDO well within 1mHz, typically within 300uHz or 3^10-11

Here are some photos, Ill have to add a few more of the various screens later;









kj7e:
Its nice to see two GPSDO's agree so closely, using the BG7TBL for the HP 53132A reference and A channel is measuring the ZYT unit.  53132A has a -10MHz offset, 100sec gate.  Here, the ZYT is showing 52.7uHz lower than the BG7TBL or < 6^10-12 difference between the two.






Some of the other screens and data available from the ZYT unit;









The ALM2 is due the GPS antenna power is being fed from my BG7TBL GPSDO, the RF splitter has a DC block on the ZYT port so it thinks the antenna is not connected.
kj7e:
Attaching the manual.
videobelu:
I i have the model with Symmetricom unit, i send some photos....do you have some suggestion to use Lady Heather with thi unit?
I tried to use it and apparently it works, but after a while the system hangs and I have to turn off the GPSDO to restart it .....
EV:
Right click the Lady Heather icon. Choose propeties, write /is after object exe file. After that Lady Heather does not send anything to gps unit and it works ok.
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod