EEVblog Electronics Community Forum

Products => Thermal Imaging => Topic started by: hap2001 on June 21, 2023, 06:57:46 pm

Title: 3D printing files of Flir Photon enclosure
Post by: hap2001 on June 21, 2023, 06:57:46 pm

Maybe useful to someone.

Title: Re: 3D printing files of Flir Photon enclosure
Post by: Logan on June 29, 2023, 03:47:22 pm

Thank you OP!
I modified it to remove the bottom tripod mounting holes, the back DB9 holes, and the notches on the edges.
(Because I don't need them, so printing without them is a better choice, plus using DB9 for 3.3v TTL may cause confuse)
In case someone need it, I'm also sharing the STL file here.