Products > Thermal Imaging

Female charging adapter socket for Flir

(1/1)

Ugur:
Hi guys,
It needs a female charging socket, can you help me find a name or code for it?

railrun:
It is a OEM connector for FLIR, you couldn’t purchase the right one.
Here is the non-OEM product:
MQ172X-4SA-CV(31)

Ugur:
Thank you for your answer. yes, the image of this product is slightly different, the adapter input may not fit this socket.

Fraser:
I found the nearest possible equivalent for the original FLIR part and it is the one detailed by Railrun. At the time I discovered it, I suggested that FLIR had a custom connector produced using the MQ172 series as a start point in the design. The MQ172 series are smaller than the FLIR part and the ‘keying’ of the connector is different. I have not been able to find a supplier of the FLIR connector and they have to be robbed from parts donor charging docks and original FLIR power adapters. In some cases, users elect to have a MQ172 series connector installed in the camera and charging docks so that a standard connector is present for adaptions. The plug on the power adapter must also be changed, of course.

Fraser

Navigation

[0] Message Index