EEVblog Electronics Community Forum

Products => Thermal Imaging => Topic started by: Uho on January 28, 2020, 09:00:18 pm

Title: Flir BI-OCULAR Scout teardown.
Post by: Uho on January 28, 2020, 09:00:18 pm

Flir BI-OCULAR Scout  teardown. I restored the electric cable in the thermal imager. The thickness of the copper tracks is 0.1 mm. The electric board is made together with electric cables. For soldering, I made a mount. An interestingly implemented display heating mechanism. Heating is needed to operate at temperatures below 0 Celsius.
You can watch the video here https://youtu.be/akfxOZAu3zs