| Products > Thermal Imaging |
| Flir E40 Upgrade & Configuration |
| << < (95/95) |
| maksym:
A happy new Exx MKII owner here. I wonder if anyone owns an optional 15 degree lens - does it make any sense for PCB work? The specs say it is 1.7x magnification, but the minimum focus distance is listed as 1.2 meters, which probably makes it pointless for close-up inspections. |
| azur:
--- Quote from: kaz911 on September 18, 2020, 12:45:26 pm ---Hi all hardworking people, got my hands on a E40 mk2 with MSX - sn 645 HW v. 1.2 FW 4.11.0 Managed to get it updated and working in 320 via Parallels Win10 on MBP. Took a while to realise that Flir Tools no longer installs the RNDIS drivers.... Questions: I have the 10mm (45deg) lens for my old E50bx. But when I use it on the E40mkII - MSX can not be enabled? (So add lens and REMEMBER to change lens settings to 45DEG) 2. Does that require additional calibration to get MSX or will it not work at all? (Got 3 options on MK-II in Lens " None, FOV 45d and FOV15d" - but on the MK I - I have the 45DEG Lens as a 4th option with S/N listed. So "FOV 45d SN 234234234" - I have tried copying the Maps over from the MK I - but no change. So where does FLIR store that info?... In general I find the old MK I - more geeky ... but about the same image quality. I have not found an easy way to add more than 1 measurement box onto the MK II? I do find focus easier with MSX - image kind of "jumps" in place when you have focus. 45 Deg lens seems to decrease temperature readings with about 2 deg C. So ALWAYS remember to set the lens settings correct else your measurements are out of whack! 3. Does anyone have release notes about what has happened since firmware 4.11.0? And is there a >4.11.0 with service menu available somewhere? The manual now says it has a "Spotting" function which is meant to spot people with high temperatures - but I don't know which release that was in. The Menu for enabling it is not in the 4.11.0 (it disables camera sleep mode as well) /k --- End quote --- Good day! Do you still have your own E50bx + 10mm (45deg) ? |
| Navigation |
| Message Index |
| Previous page |