Author Topic: Flir Ex with 2.11 and RNDIS mode  (Read 1682 times)

0 Members and 1 Guest are viewing this topic.

Offline jmsTopic starter

  • Newbie
  • Posts: 2
  • Country: de
Flir Ex with 2.11 and RNDIS mode
« on: October 13, 2016, 05:36:21 pm »
I have a Flir E6. I switched it into RNDIS mode and checked the ports with nmap.
nmap found the following active ports:
TCP:
  21: FTP
  23: Telnet
  80: HTTP
 139: netbios
 443: https
 445: smb
22136: ? (appcore)
22176: ? (AppServices)
22177: ? (Resmon)


UDP:
     67:  DHCP
22100: ? (AppServices)

What is on the ports 22176/22177/22100? Is it uPnp?

« Last Edit: October 14, 2016, 07:54:20 pm by jms »
 

Offline joe-c

  • Frequent Contributor
  • **
  • Posts: 350
  • Country: de
    • Joe-c.de
Re: Flir Ex with 2.11 and RNDIS mode
« Reply #1 on: October 13, 2016, 09:52:12 pm »
I use port 23 with Telnet to get access to the Command line.

the other ports looks interesting, i maybe look later at it...

and the FLIRInstallNet.exe can be used to set install a FW or send commands, it has a basic telnet console.
Freeware Thermal Analysis Software: ThermoVision_Joe-C
Some Thermal cameras: Kameras
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf