EEVblog Electronics Community Forum

Products => Thermal Imaging => Topic started by: Hugoneus on January 10, 2016, 05:33:19 pm

Title: FLIR MR160 Thermal Imaging & Moisture Meter Review, Teardown & Experiments
Post by: Hugoneus on January 10, 2016, 05:33:19 pm

You can watch the video here: [28 Minutes]
youtu.be/CLIaCu2opcc (http://youtu.be/CLIaCu2opcc)

More videos at The Signal Path:
http://www.TheSignalPath.com (http://www.TheSignalPath.com)

Title: Re: FLIR MR160 Thermal Imaging & Moisture Meter Review, Teardown & Experiments
Post by: Len on January 10, 2016, 07:30:06 pm

I was expecting you to measure the moisture content of Poochie.

Title: Re: FLIR MR160 Thermal Imaging & Moisture Meter Review, Teardown & Experiments
Post by: frenky on January 12, 2016, 02:43:06 pm

How come that you bought MR160 with 80x60 resolution for 600$ instead of Flir One V2 with 160x120 sensor for 250$?

Is is because MR160 would be more interesting in a teardown video?

P.S:
I really like your educational videos. Especially when you are fixing some hardware; it's like watching a detective at work. :-+