Author Topic: Flir vue pro  (Read 1849 times)

0 Members and 1 Guest are viewing this topic.

Offline xbnipxTopic starter

  • Newbie
  • Posts: 9
  • Country: us
Flir vue pro
« on: October 31, 2016, 02:59:05 pm »
Hey guys I was wondering if anyone owns a flir vue pro camera? Do the 640 and 336 models have the same sensor? If so I was wondering if it is hackble like the Ex or EXX series camera. Thanks
 

Offline Fraser

  • Super Contributor
  • ***
  • Posts: 13202
  • Country: gb
Re: Flir vue pro
« Reply #1 on: October 31, 2016, 04:24:40 pm »
No, A different microbolometer is used for each resolution.

The Tau/Vue series configuration settings are not as easy to access as the FLIR E4 as configuration is held in firmware. They do not run WinCE.

Fraser
« Last Edit: October 31, 2016, 06:40:33 pm by Fraser »
If I have helped you please consider a donation : https://gofund.me/c86b0a2c
 

Offline Chanc3

  • Frequent Contributor
  • **
  • Posts: 441
  • Country: gb
Re: Flir vue pro
« Reply #2 on: November 02, 2016, 10:17:40 am »
On a side note, the FLIR Vue PRO R has an accuracy of ±20°C or 20% when flown at 100m!!! I wouldn't touch that with a barge pole!
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf