Products > Thermal Imaging
FLUKE TiR2,TiR3,TiR4, Ti40,Ti45,Ti50,Ti55
MedMax:
I solved now the power supply issues on my Ti45 thermal camera. :D :D
But now I need the content of the "internal SD-card" to boot the system up.
( I got the camera without the SD-card ..... |O )
Can somebody please help here ???
Thanks
Chanc3:
I believe I have the files somewhere from when I had to replace a blown tantalum capacitor. Let me have a look. I assume it's for the SD card in the image attached?
Chanc3:
I have attached what I think are the files I took off that internal SD card. This was back in 2015, so I don't know if this is all of the files. It is from a TiR3 I fixed.
Chanc3:
Did this work?
MedMax:
Hi Chanc3
First of all BIG THANKS for your help. :) :)
I just copied the files on a SD-Drive an tired it on my Hardware.
unfortunately it did not work,.....
Do you possibly know if I should see any "boot activity on the screen" without the SD-Card.
Do I need a WIN-CE image on the SD-Card ???
Would be great if somebody can answer !
KR Max
Navigation
[0] Message Index
[#] Next page
Go to full version