Products > Thermal Imaging

Guide PC210 Review

<< < (19/20) > >>

serenkiy515:
Anyway, I want to update. No one but you is talking to me here :'( .
I think I figured out why there are such different readings in temperatures. Firstly, it is inertia. The device is large and closed. Inside it there is a thermocouple which is the reference point of the thermometer. When we go outside with the device from the room, the device relies on room temperature when measuring (does not have time to cool down / heat up), hence the incorrect readings. If the device is on the street for a couple of hours, it will start measuring normally (only on the street), there will be discrepancies with room thermometers in the room again.
I think this is not a revision of :palm: the case or the software.
Who didn't disassemble the device? See if there is a thermocouple or a thermistor inside 8)

Все равно, хочу обновить. Не кто кроме Вас с мной здесь не говорит  :'( .
 Кажется я разобрался почему такие разные показания в температурах. Во первых это инерция. Прибор большой и закрытого типа. Внутри него есть термопара которая является точкой отсчета термометра. Когда мы с прибором выходим на улицу из комнаты, то прибор опирается при измерении на комнатную температуру (не успевает остыть/нагреться), отсюда и неправильные показания. Если прибор полежит на улице пару часов он начнет мерять нормально (только на улице), в комнате снова будут расхождения с комнатными градусниками.
 Я считаю это не доработка  :palm: корпуса или программного обеспечения.
Кто не будь разбирал прибор? Посмотреть есть ли там внутри термопара или терморезистор  8)

Hamelec:
Anyway, you are free to do what you want - also to ask five times more for a firmware.
Some opinions to it are written here:
https://www.eevblog.com/forum/thermal-imaging/guide-pc210-review/msg4818269/#msg4818269
https://www.eevblog.com/forum/thermal-imaging/guide-pc210-review/msg4817654/#msg4817654
and also in other threads here..
good luck.

berke:
Does anyone know how to get a video feed from this under Linux?  It's UVC class but guvcview for example can't handle it.  (I'd like to avoid messing with the FW if possible.)

marmalade:
I'm confused by the frame rate in the specs. What does 25Hz / 9Hz mean? Why are there two frame rates? Can someone help me?

Hawaka:

--- Quote from: berke on January 09, 2024, 10:11:31 am ---Does anyone know how to get a video feed from this under Linux?  It's UVC class but guvcview for example can't handle it.  (I'd like to avoid messing with the FW if possible.)

--- End quote ---
Have a look at this, maybe you’ll find some info on the video stream

https://github.com/Lexy1972/PC210Viewer

Navigation

[0] Message Index

[#] Next page

[*] Previous page