i7

[ignat750]

The  Mk2 i7 (the black one) uses a 320x240 microbolometer limited to 140x140...
i7 black, кто то сделал 320х240???

[ignat750]

please tell me where to download flirtool or the best analogue.

[ignat750]

And is there a protection for the lens from particles, dust particles, sand, chips falling into it?
For example, you look at the bearings of a motor, and grains of sand fly from it ...

[ignat750]

518F maximum ... no longer possible?

[Uho]

And is there a protection for the lens from particles, dust particles, sand, chips falling into it?
For example, you look at the bearings of a motor, and grains of sand fly from it ...

Simple and cheap protection is a thin film of polyethylene. I did mount the protection on e8. Or filter protection. It is more expensive but more efficient.

[ignat750]

Thanks!

[Uho]

The last photo is a macro lens holder for the Flir I7. Instead of a macro lens, you can put a filter. Then it will be a defense.

[ignat750]

I realized that this can be done independently. Thank.

[ignat750]

I see in i7, the resolution is 240x240. Please reset the original file with E8 320x240.

[ignat750]

Help. The device turned on -518F ... after switching on and off, turned on with a reading of -150F. After resetting to factory settings, it worked as it should ... What was that?

[ignat750]

What is the problem? i7 turns on and freezes on 523F, forcibly turn it off and on, shows 334F ... And it helps to restore the operation of the device, only reset to factory settings ...

[ignat750]

HELP!