EEVblog Electronics Community Forum
Products => Thermal Imaging => Topic started by: kosomsk on May 30, 2020, 10:50:26 am
-
Hi All ;)
Who can help me with indentify this connectors (need marking of male part)
-
Looks like LEMO connectors
Could be:
FGG.1B.310
FGG.1B.305
FGG.1B.307
But please double-check
-
Lemo connectors on a FLIR PM Series camera.
From memory ( but do check data sheets to be certain)
Power/Video/RS232 is 2B-310
Mic/headset is 0B-305
video out is 0B-307
Lemo catalogue is available on line ..... they are expensive ! I do hold stock of the PM series connectors however.
Pinout for all three connectors appears in the cameras user manual.
Fraser
-
I just dug our the three plugs to confirm identity.
They are:
10 pin LEMO FGG 2B-310
7 pin LEMO FGG 0B-307
5 pin LEMO FGG 0B-305
I attach pictures.
The FGG 2B-310 in particular can be very expensive.
Fraser
-
Thanks for help :clap:
-------------------------------
Omg :scared:
10 pin LEMO FGG 2B-310 $104,79 4-5 weeks
7 pin LEMO FGG 0B-307 $46,34 4-5 weeks
5 pin LEMO FGG 0B-305 $42,20 4-5 weeks (not interesting for me)
:wtf:
151$ for two connector |O
Who know cheapest analogs, may be from Ali :-//
-
I can do them much cheaper ;)
PM me but you need a way to pay me that we can both use.
Fraser
-
Check it on ebay. Sometimes you can buy connectors already with a piece of cable. It‘s much easier this way ;)