Products > Thermal Imaging

OpenIRV. ISC0901B0 (Autoliv NV3, FLIR E4/5/6/8) based opensource thermal camera

<< < (78/78)

Found some failures in the HDL design. Raw image stream is now working and shown on the LCD.
Now I have to check the NUC and histogram equalization.

I think there's more missing in this image than just post-processing. Perhaps some binary mix is involved, like wrong bit or byte order or other 14-bit-stream conversion errors.
And what are those geometrical spots / overlays on the image ? Try using some more contrasted object like a cup of hot tea or something.

Yes of course. It's the 14bit pixel data streamed through the LUT (look up table/heatmap) which only expects 8-bit per pixel. But the stream is written to RAM and read from RAM. So that is already all working.

Those geometrical spots are OSD (Blue cube, green line, blue circle) data which are shown as overlay. Just some playing with the graphics library.

You can create a patronite account for help you with your work :)


[0] Message Index

[*] Previous page

There was an error while thanking
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod