EEVblog Electronics Community Forum
Products => Thermal Imaging => Topic started by: BG8EQB on March 04, 2021, 07:38:22 am
-
Excuse me, can PURETHERMAL 2 +LEPTON 3.5 be used on mobile phones? According to the official website, it seems that it can be used on Android phones, but after I connect the phone, it can't be used! |O |O
(https://cdn.shopifycdn.net/s/files/1/1688/0081/products/DSC0514-min_1600x.jpg?v=1599604809)
(https://cdn.shopifycdn.net/s/files/1/1688/0081/products/DSC0123-min_1600x.jpg?v=1599775961)
-
There’s a specific android app called UVCCamera you’ll need to download on your phone to use the camera. After that you should just be able to plug it in to the phone and open the app to see the camera’s output. You won’t get any additional palettes or radiometry unfortunately.
-
There’s a specific android app called UVCCamera you’ll need to download on your phone to use the camera. After that you should just be able to plug it in to the phone and open the app to see the camera’s output. You won’t get any additional palettes or radiometry unfortunately.
Thank you very much for your reply, I tried this app, but it still doesn’t work
-
Do you have any other cables you could try? It might just be that the usb cable you’re using is for charging only and won’t allow the PT2 and lepton communicate.
-
Do you have any other cables you could try? It might just be that the usb cable you’re using is for charging only and won’t allow the PT2 and lepton communicate.
I have replaced several OTG data lines, and they all have the same result