Thermal Imaging Gallery II

[Bill W]

OK, so about 4V must be where the micro ADC side settles when open circuit.

The spot units are stand-alone so can be run as a separate 'toy'.  The only oddity is that the ones we bought for Argus2 & Argus3 were narrower field of view ('spot ratio' 20:1) than the commonly sold type which were 10:1.

Bill

[hap2001]

Pixel-perfect splash screen for Flir Tau2.
It's 640x512@256 colors BMP, the standard defined by Flir. (Also works on non-640 models)
Including a few test point: analog scan range, resolution, RGB.
I have to zip it because BMP is not allowed to upload.

[gamerpaddy]

Subject: Worksite outside my window
Camera: northpoint akir01 (pico384 sensor)
Lens: 19mm f1.0
Original resolution: 384x288
Camera mods: added composite video out jack to connect up a video grabber, stk1160 in this case running on android
Image manipulation: grabber and app greatly reduces image quality, it looks better on the native built in monitor.



edit: made some more today using a different grabber (avermedia ezmaker 7) on a windows tablet
some are blurry, hard to hold it still when its sub zero

warm water exhaust from a toilet paper factory.. probably 500L/s at around 30..40°C, what a waste

looks like this (see attachments)

[hap2001]

Seek Shot (Pro/non-pro) 1/2

[hap2001]

Seek Shot (Pro/non-pro) 2/2

[gamerpaddy]

p2 pro

i can see my ulis sensor scanning once turned on


& laser pointer stuff

[CuriousDude]

Keeping my coffee warm this morning.