EEVblog Electronics Community Forum
Products => Thermal Imaging => Topic started by: mr_mx on December 04, 2023, 10:37:53 pm
-
Hello all,
My objective is to solve the problem with analysis of thermal photos made by thermal camera Uni-T UTi260E (256x192).
This is almost not possible with supplier program - like comparing normal vs thermal photo.
I red as many topics as possible, but I failed. I look into Thermovision_JoeC and I'm ammazed with it. :-+
But my knowlage is too small (in programing too - I'm leagining) to work with the taken photos.
I noticed that program have support for UTi260B cammera for .BMP format and there is needed also some photo proccesing is required.
But photos from 260E cammera has .jpg extantion and I don't know what to with this.
Can someone explain in simple words what should I do to open photos in Thermovision_JoeC? In attachment are photos from cammera.
If thera are mistakes in text, please be polite. It's not my first language :).
In spare time I'll prepare the review of cammera, so you can ask if you have question :)
Cammera details
Features
1. Infrared resolution: 256x192(49152)
2. Frequency frame: 25Hz
3. Temperature measurement range: -20℃ to 550℃
4. Temperature measurement accuracy: ±2℃ / ±2%
5. Support visible light fusion (200W visible light pixels)
6. Digital zoom: 2x , 4x
7. LED lighting
8. Isotherm function
9. Custom image storage file library
10. High and low temperature limit alarm
11. Fast hot and cold tracking
12. Custom temperature measurement (point, rectangle, circle, line)
13. PC analysis software + PC screen projection software
14. Mobile APP supports Wi-Fi photo download
15.Type C direct charge / detachable lithium battery, battery pack can be charged separately
16. IP54 protection grade, 2 meters drop
I bought in the end of 2022. It cost me around 640$ with tax to EU (Poland).