EEVblog Electronics Community Forum

Products => Thermal Imaging => Topic started by: plumbing32 on January 06, 2021, 11:09:55 pm

Title: Upgrade FLIR E6 to E8
Post by: plumbing32 on January 06, 2021, 11:09:55 pm

Hacking for  FLIR E6
Upgrade E8 resolution
Is there anyone who can help me?

Title: Re: Upgrade FLIR E6 to E8
Post by: LeptonMan on January 13, 2021, 07:55:18 am

I'd like to know also. I tried with the FLIR_E4_2.11.0_hack.zip but that resulted in something strange. I was able to bring the camera back to e6 resolution. I did read of a person
who had an e6 and was able to liberate the resolution but they went up to firmware 3.xx to do so. I thought that was not a good idea from researching this knowledge base?

Title: Re: Upgrade FLIR E6 to E8
Post by: brcondor on February 11, 2021, 01:39:34 am

Depending on the firmware version, it seems possible for resolution. I think it was reported for V2.3. In the E4 discussion, E6 used a similar slightly modified approach for the conf.cfc.  Menus may also be customized but I did not read those posts closely.