Products > Vintage Computing
Elektor EC-6809
Wawavoun:
Hello there !
I try to run again Flex09 and of course first of all I must build a computer 6809 based for that.
My first choice is the Elektor system named EC-68 or sometime EC-6809 published in "Elektor Computing 3" in 1985 and in french in october 1986 number.
I need two things :
- on side of the ext pcb (video + floppy interface) was not given. If anybody has a good picture ? But nevertheless this can be solved because in put the pcb again in Kicad so... Routing will be different but if there is no other choice !
- More important : this system require two 2716 and one 2732 eproms (Elektor ref ESS540, 541 and 542). This is boot prom, assist09 and character generator. The fist one is really a problem. Assist09 is on the internet so... and the character generator eprom is probably the same that the one in the Junior Computer VDU board which I have.
Many thanks to anybody which will give any information about that.
If there is somewhere another design able to do the same (run Flex09 from real floppy) I will also be interested !
Regards.
Philippe
Wawavoun:
Hello,
Some news from this project :
The two boards are manufactured and tested.
The CPU board is working with a modified Assist09 monitor.
The interface board video part is working with a modified character generator coming from the Junior Computer. The floppy interface part have not been tested yet.
I renew my call for any information about the ESS-540 and ESS-541 eprom (dump, listing, asm source..., whatever you have).
If anybody have this system or can help in this topic please take contact !
Regards.
Philippe
granzeier:
Those boards look well done. It looks like it will be a nice system.
You say that you are missing the boot EPROM, but the pictures show that your system is running. What are you using to boot? Are you just using a generic boot, or are you getting the system up some other way?
Wawavoun:
Re,
Yes thats need some clarifications.
The eprom which really do the boot is called "monitor rom" by Elektor in the article (ref ESS-540).
At this place I have a modified assit09 monitor, so my system boot.
What they call "boot rom" ESS-541 is a collection of subroutines doing various jobs related to the // keyboard, the floppy interface and the video.
This name probably come because one these subroutine boot Flex from the floppy.
This eprom is the one that really miss to get a full working system...
Regards.
Philippe
granzeier:
I see, thanks.
I have several Elektor/Elector (USA, UK, India) and have been looking to see if I can find any more info about this, but nothing yet. I'll keep looking.
Navigation
[0] Message Index
[#] Next page
Go to full version