« previous next »
Pages: [1]   Go Down

Author Topic: Transformer Help  (Read 1003 times)

0 Members and 1 Guest are viewing this topic.

Offline PsychoMasterTopic starter

  • Regular Contributor
  • *
  • Posts: 67
  • Country: england
Transformer Help
« on: May 22, 2015, 07:29:21 pm »
Hi Folks
I am building a 0-24v PSU that switches up in two stages using a relay and a 0-12-24 transformer.
I do not have such a transformer but I do have separate 12v and 24v toroidal transformers. If I connect one secondary of each together and connect to either of the others through the relay to get 12 then 24 volts will this be OK?   I am thinking about inrush current as a problem maybe. It would give the option of separate switches on each transformer if only using one voltage range.
 Would this be OK?
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee