Hi Group,
Apologies in advance as I know this subject has been greatly discussed in the past ..... I have researched the threads and I am after some confirmation regarding the bootloader versus firmware issue for the DSA815TG.
I have an older Rigol DSA815TG ( built around 11/1/2013 ) with the 00.01.02 version of the boot loader.
At the moment I am running 00.01.07 version of the firmware which I upgraded early last year from version 00.01.05.
Main board version is 00.04
Digital board FPGA is 00.05
All options installed as well.
From what I have read I should be able to upgrade to the new 00.01.15 firmware without losing any of the options ? The problem I believe is if the bootloader is version 00.01.04 or later, this is what causes issues...
Am I correct ? I would hate to lose the options for a few gains in the operation,
Thanks for your help everyone, any thoughts would be appreciated,
Cheers,
Rob.