Hello,
i have a new Version of my Thermovision including some Optris Pi400 stuff.
http://joe-c.de/pages/posts/programm_thermovision_joe-c_184.php#V1_0_2_0if you change the Filedrop mode to "Drop-> Optris PI400 Mode" (in "Datei" or "File" if you set Language to EN).
after that you can easy Drag & Drop your *.tif, *.tiff,*.csv Files.
the temperature of the tif files have to setup manually by choose "fixed". for a dynamic calculation there are Level and Span values. You have to setup them following:
take a image with a big temperature range... for example -10 to 90°C. calculate the Range (max-min) and change the span value until your image has the same range in the Thermovision (the range is noted in the Scale bottom). After that you change the offset until you reach the real temperature values of your image (while changing the offset maybe the Span needs tiny changes because the Range moves).
its the same Setup as the
Seek thermal Camera needs.
if the setup is finished, your other images should be show values near the real.
Not that accurate, but I don't now how Optris store the Temperature.
Well... the csv has a poor Sensitivity with the 0.1°C but the Values are truth.
you can import csv files by drop. additional there is a folder Processing. you can hit the button and choose a folder, or just drop the folder in workspace of the Thermovision.
The folder processing does:
- read all *.csv files
- create a subfolder called "ThermoViewer_JPG"
- convert each csv to a jpg file
- writes at end the Overview.txt with some extra info's, like the number of files, the highest and lowest temperature for each and for all files...
I hope it's useful for you.
and last but not least, a big thanks for
tomas123, who make a great example for reading the Files (peculiar the tif).
joe-c