Another Logic Analyzer Question (this one about drivers)

[Renate]

I just reinstalled the latest PulseView. With/without my FX2LP plugged in it crashes on startup.

I had had a problem with the Intel Bluetooth adapter on my motherboard and had just updated the AMD drivers for my Asus X570. That includes the Aura LED controller. (Actually, I may have never used PulseView on this iteration of my PC?)

In any case, the Aura USB hardware has two USB interfaces, Interface #0 & Interface #2! Interface numbers must be consecutive. This breaks some USB enumeration libraries. The fix is to manually select your interface:

Code: [Select]

C:\>pulseview.exe -D

[willPowell]

I had the same problem also. This was incredibly frustrating and spent far too much time debugging.
Instead of pulseview I installed Salae Logic and it worked flawlessly - https://www.saleae.com/downloads/
Hope this helps someone.

[Iceage]

In case somebody else comes across this same issue on Windows 10 (as I did) please find a link below for useful instructions on how to get the clone Logic 16 working with Sigrok. I though it best to share on this thread as my searches for answers to the issue lead me here

Hope you find it useful.

https://github.com/anno73/Saleae-Logic16-Clone/wiki

Best wishes.