Hi all this is my first post here i hope that it will not be a question but !!!!
ok i was fixing a machine that have a configuration eeprom AT17LV256 dip-8
and its blank or damaged since that replaced it with another one from a working machine and now it starts normally the problem here is that i want to read it and program it into the blank one
i did some research and i found a programmer designed by a Russian guy software and hardware
http://www.kasatky.ru/ but in his programmer he targeted a plc family of 17LV
but one i have is dip-8 type so basically its not the same and i did some effort but im confused so please if someone can help editing the schematic or something it could be very helpful from him
thanks in advance and sorry if ask much and my English is bad i know