Hi
I'm hoping someone can guide me to a solution to stop my SSR from leaking current.
The problem is that every 5 seconds I get a flash from the security light when it's not powered, on reading the data sheet I believe that it's caused by a 3ma current leakage from the SSR.
I've read some other topics and believe a resistor (2.2ohm 10watt) may help, I'm not confident that I would pick the right resistor and put it in the correct location.
SSR:- Fotek SSR-10DA
Security Light: LED, 10 Watt, 240v AC
I've included a picture of the circuit, any assistance appreciated.