What is this conector type?

[001]

Hi

I`m gonna buy LCD with ribbon wire


What type connector on PCB I need?

[mariush]

Flat flex connectors ... figure out number of traces and pitch (spacing between the wires) and thickness of ribbon cable : https://www.digikey.com/products/en/connectors-interconnects/ffc-fpc-flat-flexible-connectors/399

The displays don't have the same ribbon cable... the datasheet would normally say or you can determine from drawings. 

[ledtester]

Have a look at:

https://www.aliexpress.com/item/32982483720.html

and:

https://www.aliexpress.com/item/32858205410.html

Make sure you get the right pitch.

[Ysjoelfir]

How about looking into the datasheet for the Display you intend to buy? Most probably they tell you exactly which mating connector should be used.