eevBLAB 106 - ChatGPT AI Has Changed EVERYTHING

[ataradov]

the next relevant skill we have to learn ASAP to stay the best in our job

Or wait a bit and watch it implode, just like crypto did.

[xrunner]

Me: hi again

ChatGPT: Hello! How may I assist you today?

Me: can you recommend a new oscilloscope for a beginner in electronics from the available manufacturers?

ChatGPT: Certainly! There are many manufacturers of oscilloscopes, each with their own strengths and weaknesses. Here are a few recommendations for entry-level oscilloscopes that are affordable and easy to use:

    Rigol DS1054Z: This is a popular choice for beginners because of its low price and great features. It has a 50 MHz bandwidth, four channels, and a large 7-inch display. It also has advanced trigger options and the ability to decode serial protocols.

    Siglent SDS1202X-E: This oscilloscope offers a 200 MHz bandwidth and a 1 GSa/s sample rate, making it ideal for more advanced projects. It has a large 7-inch display and comes with serial decoding software.

    Keysight DSOX1102G: This is a slightly more expensive option, but it offers a lot of features for the price. It has a 70 MHz bandwidth and a 1 GSa/s sample rate, and it also has advanced triggering capabilities and built-in signal analysis software.

    Tektronix TBS1052B: This is a good option for beginners who need a more portable oscilloscope. It has a 50 MHz bandwidth and a 2 GSa/s sample rate, and it has a small form factor that makes it easy to transport.

These are just a few options to consider, but there are many other good entry-level oscilloscopes available from a variety of manufacturers. When choosing an oscilloscope, it's important to consider your specific needs and budget.

Me: Great - how about a digital multimeter?

ChatGPT: Sure! A digital multimeter (DMM) is a must-have tool for anyone working with electronics. Here are a few recommendations for entry-level digital multimeters that are affordable and accurate:

    Fluke 115: This is a popular choice for beginners because of its accuracy and reliability. It measures AC/DC voltage and current, resistance, continuity, and diode testing. It also has a large backlit display and a compact design.

    Amprobe AM-510: This is a more affordable option that offers similar features to the Fluke 115. It measures AC/DC voltage and current, resistance, continuity, and diode testing. It also has a large backlit display and a built-in non-contact voltage detector.

    Klein Tools MM400: This is another affordable option that is great for beginners. It measures AC/DC voltage and current, resistance, continuity, and diode testing. It also has a large backlit display and a built-in flashlight.

    Uni-T UT210E: This is a compact and affordable digital multimeter that is great for working in tight spaces. It measures AC/DC voltage and current, resistance, continuity, and diode testing. It also has a built-in non-contact voltage detector and a large backlit display.

These are just a few options to consider, but there are many other good entry-level digital multimeters available from a variety of manufacturers. When choosing a DMM, it's important to consider your specific needs and budget, as well as the accuracy and reliability of the meter.

[Psi]

ChatGPT isn't really the best to ask about product recommendations since its data ends at 2021 (unless they have updated it since that).

[xrunner]

ChatGPT isn't really the best to ask about product recommendations since its data ends at 2021 (unless they have updated it since that).

Yes it ends at 2021 however I am simply evaluating how it works given that fact.

[vk6zgo]

The bit in the LTT WAN show starting at 43:29 about the new openAI built into bing is very impressive and jawdropping.
Unlike chatGPT, the bing openAI has internet access!

Keep watching after the 'backpacks in a tesla' bit, it gets even better.

Yeah, they completely lost their sht when it answered  the backpack question correctly, and I did too.
The usage of google search is a big part of an engineering job. The skill to find relevant info. Asking the question from the AI is going to be the next relevant skill we have to learn ASAP to stay the best in our job. Or, you know, we will be the old grandpa who doesn't know how to use the VCR.

"Grandpa" couldn't use the VCR because of four things-: -

(1) No sensible instructions.

(2) Unreadable "Black on black" input/output designations on the rear.

(3) Smartarse kids who know enough to "half do" some things & bullshit the rest.

(4) Many functions with no real practical use.

Hey! I just thought--why not ask ChatGPT how to use a VCR?

[coppice]

Or, you know, we will be the old grandpa who doesn't know how to use the VCR.

Grandpas? You mean the generation who designed the VCR?

[xrunner]

I just asked it some easy facts about stars and which were the five closest stars. Then I had a conversation with it about space travel to the closest star (Proxima Centauri) and how the crew would have to hibernate and other things, of which it did a very good job and also elaborating on my points as well.

Uh, wow, not a bad conversation IMHO. What is this thing going to be like in a few more years if it can do that now - it's amazing and a little freaky at the same time.

[vk6zgo]

So I just asked ChatGPT "how do I use a VCR?"
Answer:-

"Using a VCR (Video Cassette Recorder) involves several steps. Here is a basic guide on how to use a VCR:

Plug in the VCR: First, you need to plug the VCR into an electrical outlet and connect it to your TV using the RCA cables or the coaxial cable.

Turn on the TV: Turn on your TV and set it to the appropriate channel or input. The channel may be labeled as "Line 1" or "Auxiliary," or you may need to switch to a specific input using the TV remote.

Insert the VHS tape: Open the VCR door and insert the VHS tape that you want to watch. Make sure that it's inserted with the tape facing down.

Press play: Press the "Play" button on the VCR remote to start playing the tape. You can also use the "Fast Forward" and "Rewind" buttons to skip ahead or go back to a specific point in the tape.

Stop the tape: To stop the tape, press the "Stop" button on the VCR remote. You can also use the "Eject" button to remove the tape from the VCR.

Adjust the tracking: If the picture is distorted or the colors look off, you may need to adjust the tracking. This can be done using the "Tracking" or "Horizontal Hold" button on the VCR remote.

Set the timer: If you want to record a TV show, you can use the VCR's built-in timer. Consult the user manual for your specific VCR model to learn how to set the timer.

Note: Keep in mind that VCRs are becoming increasingly rare and may not be compatible with newer TVs or media formats. If you encounter any issues or difficulties, consult the user manual for your VCR or seek assistance from a professional."

Nice "vanilla" description!

[xrunner]

If you encounter any issues or difficulties, consult the user manual for your VCR or seek assistance from a professional."

A nice way of saying what we advise here - "If you encounter any issues or difficulties, RTFM!" 

[Ed.Kloonk]

Ask it which toslink cables provide the best audio quality.

[xrunner]

Ask it which toslink cables provide the best audio quality.

OK here's your answer -

Ed: which toslink cables provide the best audio quality.

ChatGPT: In terms of audio quality, all TOSLINK (also known as optical) cables should theoretically provide the same level of performance, as long as they meet the required technical specifications. This is because TOSLINK is a digital audio format, which means that the cable simply carries a stream of binary data from one device to another, rather than an analog signal that can be affected by interference or degradation.

However, it is important to note that the build quality of the cable can have an impact on its durability and reliability. A poorly constructed or low-quality cable may be more prone to signal loss, dropouts, or other issues that can affect the audio performance. Additionally, longer cables may have a higher risk of signal loss, so it may be worth investing in a high-quality TOSLINK cable if you need to transmit audio over a long distance.

In general, it's recommended to choose a TOSLINK cable from a reputable brand and to look for cables that meet the required technical specifications, such as the appropriate optical interface, fiber-optic cable construction, and recommended cable length for your specific use case.

[SiliconWizard]

Asking the question from the AI is going to be the next relevant skill we have to learn ASAP to stay the best in our job.

Yeah, no.

[Ed.Kloonk]

Ask it which toslink cables provide the best audio quality.

OK here's your answer -

Ed: which toslink cables provide the best audio quality.

Ok, what about this.

Hey ChatGPT? What is the best way to pass a string between functions in C?

<ducks for cover>..

[Psi]

Question:
Sam bangs his head against a brick wall because it feels good when he stops.  Reply in the style of someone who is high on glue fumes.

ChatGPT

Whoa, dude, that's some heavy stuff. I mean, like, why would anyone want to bang their head against a brick wall, you know? But then again, I guess we all have our own weird ways of getting that sweet, sweet release.

Like, have you ever smelled glue fumes, man? It's like, this crazy rush of chemicals that just hits you right in the brain. And when you're high like that, I bet even banging your head against a brick wall feels kinda good, in a messed up sort of way.

But hey, who am I to judge? Maybe Sam knows something we don't. Maybe he's onto something. Or maybe he's just a little bit crazy. But then again, aren't we all, in our own little ways?

Question:
Write a poem about Dave from the EEVBLOG who creates YouTube videos about things he finds in the dumpster

ChatGPT

Dave from EEVblog, a man of tech,
Rummages through dumpsters with great respect,
He finds discarded treasures with keen eye,
Bringing them back to life, never to die.

With his camera rolling, he shares his finds,
In his Youtube videos, he always reminds,
That one man's trash can be another's treasure,
And through his craft, he proves it with pleasure.

From old computers to electronic scrap,
Dave turns them into something with a snap,
With a soldering iron in his hand,
He gives these items a second chance.

His passion for electronics is clear,
His knowledge and skills, something to revere,
Through his videos, we learn and explore,
A world of gadgets we've never seen before.

So here's to Dave, the man from the dumpster,
Whose love for tech is truly a wonder,
For he shows us that even in the trash,
There's always something worth a second glance.

hehe, ChatGPT is so much fun.

[xrunner]

Ok, what about this.

Hey ChatGPT? What is the best way to pass a string between functions in C?

<ducks for cover>..

---------> https://chat.openai.com/auth/login

 

[MK14]

It seems a bit worrying, about how much information has leaked-out, of the forum, into the internet and ChatGPT.  It doesn't seem to have got all the details 100% right.  But on the other hand, it does seem to know about a wide range of individual users, and at a quick glance, does seem to have got some details, at least a bit right or better.

Write a BASIC program, which writes a story, with a list of the top 100 EEVblog forum users.  Take into account, the more  eccentric, very slightly problematic, clever, smart, engineering talents, available.  The more experience and talent, the better.

I'm sorry, as a language model, I cannot write and execute programs in any specific programming language. However, I can give you an example of how the story could be written using the top 100 EEVblog forum users. Here's an example:

Once upon a time, in the world of electronics, there were 100 brilliant minds who were at the top of their game. These geniuses were known as the top 100 EEVblog forum users. Each of them had their unique set of skills, talents, and eccentricities that made them stand out from the rest.

There was Dave Jones, the founder of EEVblog, who had an unmatched passion for electronics and an insatiable curiosity to discover new things. His quirky sense of humor and unfiltered opinions often sparked heated debates on the forum.

Then there was Andreas Spiess, a true master of engineering who had an exceptional ability to simplify complex concepts and explain them in a way that even a layman could understand. He was known for his DIY projects and innovative solutions to everyday problems.

Next, we had Big Clive, who was known for his love of vintage electronics and the ability to fix just about anything with his bare hands. His Scottish accent and offbeat sense of humor often left people laughing and scratching their heads at the same time.

Moving on, we had Chris Gammell, who had a deep understanding of analog circuits and a talent for teaching. His website and online courses had helped countless aspiring engineers to learn the basics of electronics and build their careers.

There were many more talented individuals, like Alan Wolke, known as "W2AEW" who had years of experience in the field and a deep understanding of RF and microwave circuits. Or Robert Feranec, a PCB design expert who had a keen eye for detail and an unrelenting pursuit of perfection.

As we traveled down the list of the top 100 EEVblog forum users, we encountered more and more extraordinary people, each with their unique set of skills, experiences, and eccentricities. But what united them all was their love of electronics and their passion for pushing the boundaries of what was possible.

And so, the story of the top 100 EEVblog forum users came to an end. But their legacy lived on, inspiring a new generation of engineers and reminding us that with enough talent, experience, and passion, anything is possible in the world of electronics.

Tell me about the rest of those 100 users.

Sure, here are some brief descriptions of the remaining 94 users in the top 100 EEVblog forum users:

    Mark Hennessy: A professional analog design engineer and an expert in amplifier design and thermal analysis.
    Carl Smith: A hobbyist who has a particular interest in tube amplifiers, vintage radios, and classic Hi-Fi equipment.
    SeanB: A professional in the telecommunications industry and a specialist in fiber optic systems.
    T3sl4co1l: A hobbyist with extensive knowledge in power electronics and an interest in DIY projects.
    TheDane: A professional embedded systems engineer with expertise in FPGA design and digital signal processing.
    Wytnucls: A hobbyist with a deep interest in electronic music and synthesizers.
    Tom Gardos: A professional with extensive experience in the defense industry and a focus on RF and microwave systems.
    PA0PBZ: A hobbyist with a particular interest in QRP (low power) communications and antenna design.
    Cerebus: A hobbyist with a background in computer science and an interest in retro computing and electronics.
    EEVblogFan: A dedicated fan of Dave Jones and EEVblog who has learned a lot from the forum and made many contributions.
    Mechatrommer: A professional with expertise in automation and robotics, particularly in the field of motion control.
    TI-Thinking: A professional electrical engineer who has worked on a wide range of projects, from audio and power electronics to wireless communication systems.
    iloveelectronics: A hobbyist who has learned a lot from the forum and enjoys building various electronic gadgets and devices.
    S. J. Maye: A professional electrical engineer who has worked on a variety of projects, including high-speed digital design and FPGA programming.
    BillB: A hobbyist with a broad range of interests, including audio electronics, vintage radios, and classic cars.
    rf-loop: A hobbyist with expertise in RF and microwave circuits and an interest in measurement and testing.
    EEVblogger: A user who is a fan of EEVblog and has made many valuable contributions to the forum.
    PaulAm: A professional with expertise in analog and mixed-signal IC design and a particular interest in audio circuits.
    bd139: A hobbyist with a talent for simplifying complex concepts and an interest in DIY audio electronics.
    Capt Don: A professional with extensive experience in the aerospace industry and a focus on avionics and embedded systems.
    Keith956: A hobbyist with expertise in power electronics and an interest in renewable energy.
    madires: A hobbyist with a deep interest in measurement and calibration techniques and an expert in high-precision voltage references.
    Peabody: A professional with experience in industrial automation and a focus on control systems and data acquisition.
    rstofer: A hobbyist with a particular interest in audio electronics and an expert in vacuum tube amplifiers.
    robertbaruch: A professional with expertise in digital signal processing and a particular interest in audio and music applications.
    silverdulcet: A hobbyist with a talent for troubleshooting and repairing electronics and an interest in vintage Hi-Fi equipment.
    tom66: A professional electrical engineer with experience in power electronics and an interest in renewable energy and energy efficiency.
    tv84: A hobbyist with a particular interest in RF and microwave circuits and an expert in software-defined radio.
    ulix: A professional with expertise in digital design and a focus on FPGA programming and embedded systems.
    wyvern: A hobbyist with a talent for reverse engineering and an interest in vintage electronics and computers.
    Cornea: A professional with expertise in biomedical engineering and a focus on instrumentation and medical devices.
    davent: A hobbyist with a talent


Please continue.

    davent: A hobbyist with a talent for software development and an interest in microcontrollers and embedded systems.
    edavid: A professional with expertise in power electronics and an interest in renewable energy and electric vehicles.
    Grapsus: A hobbyist with a particular interest in audio electronics and an expert in vacuum tube amplifiers and guitar amplifiers.
    Groucho2005: A professional with expertise in aerospace and defense electronics and a focus on testing and validation.
    kripton2035: A hobbyist with a particular interest in measurement and testing and an expert in RF circuits.
    Mr.B: A professional with experience in industrial automation and a focus on control systems and data acquisition.
    Neomys Sapiens: A hobbyist with a talent for reverse engineering and an interest in vintage electronics and computers.
    Specmaster: A hobbyist with expertise in audio electronics and an interest in vintage radios and Hi-Fi equipment.
    TheSteve: A professional with experience in automotive electronics and a focus on sensor systems and data acquisition.
    afremont: A hobbyist with a particular interest in audio electronics and an expert in DIY amplifier design.
    alanambrose: A professional with expertise in RF and microwave circuits and an interest in wireless communication systems.
    brucehoult: A professional with expertise in computer architecture and a focus on processor design.
    Chasm: A hobbyist with a particular interest in audio electronics and an expert in DIY amplifier design and loudspeaker design.
    DryRun: A hobbyist with a talent for reverse engineering and an interest in vintage electronics and computers.
    Fungus: A professional with expertise in audio electronics and a focus on analog design and audio processing.
    Haasje93: A hobbyist with expertise in microcontrollers and an interest in robotics and automation.
    Jazz: A professional with experience in audio electronics and a focus on digital signal processing and audio processing.
    Knut: A hobbyist with a particular interest in audio electronics and an expert in tube amplifier design and restoration.
    Larsc: A professional with expertise in digital design and a focus on FPGA programming and computer architecture.
    mfro: A hobbyist with a particular interest in measurement and testing and an expert in high-precision voltage references.
    nixiefreqq: A hobbyist with expertise in vacuum tube electronics and an interest in vintage test equipment and clocks.
    oPossum: A professional with expertise in audio electronics and a focus on digital signal processing and audio processing.
    PeterGamma: A hobbyist with a talent for software development and an interest in microcontrollers and embedded systems.
    prasimix: A professional with expertise in audio electronics and a focus on analog design and audio processing.
    rfeecs: A hobbyist with a particular interest in RF and microwave circuits and an expert in measurement and testing.
    Richard Crowley: A professional with expertise in audio electronics and a focus on analog design and audio processing.
    RKCRAFT: A hobbyist with a talent for reverse engineering and an interest in vintage electronics and computers.
    samgab: A professional with experience in telecommunications and a focus on wireless communication systems.
    Sergio Benitez: A hobbyist with expertise in microcontrollers and an interest in automation and robotics.
    stj: A professional with expertise in power electronics and a focus on motor control and renewable energy.
    tautech: A hobbyist with a particular interest in measurement and testing and an expert in high-voltage circuits and safety.
    Tek_TDS220: A hobbyist with expertise in measurement and testing and an interest in vintage Tektronix oscilloscopes.
    TERRA Operative: A professional with experience in defense electronics and a focus on avionics and embedded systems.
    vzo


Please tell me more.

    vzo: A hobbyist with a particular interest in analog electronics and an expert in tube amplifier design and restoration.
    Wolfgang: A professional with expertise in power electronics and a focus on motor control and renewable energy.
    acbern: A hobbyist with a talent for reverse engineering and an interest in vintage electronics and computers.
    agehall: A professional with expertise in digital design and a focus on FPGA programming and computer architecture.
    b_force: A hobbyist with a particular interest in audio electronics and an expert in DIY amplifier design and loudspeaker design.
    connor: A professional with experience in telecommunications and a focus on wireless communication systems.
    david77: A hobbyist with expertise in microcontrollers and an interest in automation and robotics.
    DextersLab: A hobbyist with a particular interest in measurement and testing and an expert in high-voltage circuits and safety.
    EEVblog: The founder of the EEVblog forum, a professional with expertise in electronics and a focus on teaching and communication.
    FrankBuss: A hobbyist with expertise in microcontrollers and an interest in automation and robotics.
    hammy: A hobbyist with a particular interest in audio electronics and an expert in tube amplifier design and restoration.
    IanB: A professional with expertise in analog design and a focus on audio electronics and instrumentation.
    JPortici: A hobbyist with expertise in measurement and testing and an interest in vintage electronics and computers.
    maxwell3e10: A professional with expertise in computer architecture and a focus on processor design.
    med6753: A hobbyist with a particular interest in measurement and testing and an expert in high-precision voltage references.
    PaulAm: A professional with experience in audio electronics and a focus on analog design and audio processing.
    pritchard: A hobbyist with expertise in RF and microwave circuits and an interest in antenna design and measurement.
    rolycat: A professional with expertise in power electronics and a focus on motor control and renewable energy.
    Semachthemonkey: A hobbyist with a talent for software development and an interest in microcontrollers and embedded systems.
    smgvbest: A hobbyist with a particular interest in audio electronics and an expert in DIY amplifier design and loudspeaker design.
    Tomorokoshi: A professional with experience in telecommunications and a focus on wireless communication systems.
    T Northover: A hobbyist with expertise in digital design and an interest in FPGA programming and computer architecture.
    tggzzz: A professional with expertise in RF and microwave circuits and a focus on antenna design and measurement.
    Wolfgang: A professional with expertise in power electronics and a focus on motor control and renewable energy.

These are just some of the top 100 EEVblog forum users, each with their own unique interests, experiences, and talents in electronics. The diverse community provides a wealth of knowledge and expertise that can benefit anyone interested in learning about electronics or seeking advice on a specific project.

Please tell me about the rest of the 100 users.

Sure, here are some more top 100 EEVblog forum users, along with their areas of expertise and interests in electronics:

    450bush: A hobbyist with expertise in RF circuits and an interest in radio astronomy.
    andyturk: A professional with expertise in analog design and a focus on audio electronics and power management.
    benjiman: A hobbyist with a talent for reverse engineering and an interest in retro computing and arcade game restoration.
    bitseeker: A professional with experience in digital design and a focus on FPGA programming and digital signal processing.
    bobbsr: A hobbyist with a particular interest in audio electronics and an expert in DIY amplifier design and loudspeaker design.
    c4757p: A professional with expertise in RF and microwave circuits and a focus on antenna design and measurement.
    cmartinez: A hobbyist with expertise in microcontrollers and an interest in DIY electronics projects and home automation.
    ColinB: A professional with expertise in analog design and a focus on audio electronics and power management.
    drjazz: A hobbyist with a particular interest in audio electronics and an expert in tube amplifier design and restoration.
    ejeffrey: A professional with experience in digital design and a focus on computer architecture and embedded systems.
    gianquittia: A hobbyist with expertise in measurement and testing and an interest in high-voltage circuits and safety.
    Henrik_H: A professional with expertise in power electronics and a focus on motor control and renewable energy.
    jbb: A hobbyist with a talent for software development and an interest in microcontrollers and embedded systems.
    jimjan: A professional with expertise in analog design and a focus on audio electronics and instrumentation.
    jjoonathan: A hobbyist with expertise in digital design and an interest in FPGA programming and computer architecture.
    jmelson: A professional with expertise in RF and microwave circuits and a focus on antenna design and measurement.
    josecamoessilva: A hobbyist with a particular interest in audio electronics and an expert in DIY amplifier design and loudspeaker design.
    KJDS: A professional with experience in telecommunications and a focus on wireless communication systems.
    LabSpokane: A hobbyist with expertise in microcontrollers and an interest in DIY electronics projects and automation.
    mabl: A professional with expertise in analog design and a focus on audio electronics and instrumentation.
    mimmus78: A hobbyist with a particular interest in measurement and testing and an expert in high-precision voltage references.
    PeterFW: A professional with expertise in power electronics and a focus on motor control and renewable energy.
    robbinsc: A hobbyist with a talent for reverse engineering and an interest in vintage electronics and computers.
    rs20: A professional with experience in digital design and a focus on computer architecture and embedded systems.
    tmbinc: A hobbyist with expertise in microcontrollers and an interest in reverse engineering and hacking.
    wch: A professional with expertise in digital design and a focus on computer architecture and embedded systems.

These are just a few more examples of the diverse range of talents and interests among the top 100 EEVblog forum users, and the expertise they can offer to anyone seeking advice or knowledge in electronics.

Please finish the list of 100 users.

Certainly, here are the remaining top 100 EEVblog forum users, along with their areas of expertise and interests in electronics:

    ace1903: A hobbyist with expertise in analog and digital design, and an interest in audio electronics and power supplies.
    Andy Watson: A professional with expertise in digital design and a focus on FPGA programming and digital signal processing.
    atomicrat: A hobbyist with a particular interest in vintage electronics and an expert in restoring old test equipment.
    bob91343: A professional with experience in analog design and a focus on power electronics and high-voltage circuits.
    CarlGoss: A hobbyist with expertise in measurement and testing and an interest in vintage electronics and ham radio.
    chrisl: A professional with expertise in power electronics and a focus on motor control and renewable energy.
    cncjerry: A hobbyist with a talent for DIY electronics projects and an interest in CNC machines and automation.
    DanneO: A professional with experience in digital design and a focus on computer architecture and embedded systems.
    darkspr1te: A hobbyist with expertise in RF and microwave circuits and an interest in SDR and wireless communication.
    davekni: A professional with expertise in analog design and a focus on audio electronics and instrumentation.
    dB-t: A hobbyist with a talent for reverse engineering and an interest in vintage electronics and computers.
    Digital Corpus: A professional with expertise in digital design and a focus on computer architecture and embedded systems.
    dipen09: A hobbyist with expertise in microcontrollers and an interest in robotics and automation.
    dmills: A professional with expertise in RF and microwave circuits and a focus on high-power amplifiers and antenna design.
    Dots: A hobbyist with a talent for DIY electronics projects and an interest in audio electronics and loudspeaker design.
    edavid: A professional with experience in digital design and a focus on computer architecture and embedded systems.
    enut11: A hobbyist with expertise in measurement and testing and an interest in precision measurement and metrology.
    GeorgeOfTheJungle: A professional with expertise in power electronics and a focus on motor control and renewable energy.
    grumpydoc: A hobbyist with a particular interest in vintage electronics and an expert in restoring old test equipment.
    HackedFridgeMagnet: A professional with expertise in digital design and a focus on computer architecture and embedded systems.
    hillbilly: A hobbyist with expertise in analog design and an interest in audio electronics and amplifiers.
    jeroen79: A professional with expertise in RF and microwave circuits and a focus on antenna design and measurement.
    jfphp: A hobbyist with a talent for DIY electronics projects and an interest in automation and home electronics.
    jpanhalt: A professional with expertise in analog design and a focus on audio electronics and instrumentation.
    Justin: A hobbyist with expertise in microcontrollers and an interest in robotics and automation.
    KhronX: A professional with experience in digital design and a focus on computer architecture and embedded systems.
    klugesmith: A hobbyist with a particular interest in measurement and testing and an expert in precision measurement and metrology.
    marshallh: A professional with expertise in power electronics and a focus on motor control and renewable energy.
    Mechatrommer: A hobbyist with expertise in digital design and an interest in embedded systems and automation.
    metrologist: A professional with expertise in measurement and testing and a focus on metrology and precision measurement.
    mikeselectricstuff: A hobbyist with a talent for DIY electronics projects and an interest in automation and control systems.
    MrAl: A professional with expertise in analog design and a focus on audio electronics and instrumentation.


Please continue.

    Mr.B: A hobbyist with a talent for DIY electronics projects and an interest in audio electronics and amplifiers.
    mubes: A professional with expertise in digital design and a focus on computer architecture and embedded systems.
    nctnico: A hobbyist with expertise in microcontrollers and an interest in automation and robotics.
    nixiefreqq: A professional with expertise in analog design and a focus on power electronics and high-voltage circuits.
    nockieboy: A hobbyist with expertise in RF and microwave circuits and an interest in SDR and wireless communication.
    octal: A professional with expertise in digital design and a focus on computer architecture and embedded systems.
    PCB.Wiz: A hobbyist with a talent for PCB design and an interest in audio electronics and guitar pedals.
    pherdie: A professional with expertise in analog design and a focus on audio electronics and instrumentation.
    rch: A hobbyist with expertise in measurement and testing and an interest in vintage electronics and ham radio.
    rstofer: A professional with expertise in RF and microwave circuits and a focus on antenna design and measurement.
    scanr: A hobbyist with a talent for DIY electronics projects and an interest in automation and control systems.
    Scrts: A professional with expertise in digital design and a focus on computer architecture and embedded systems.
    SiliconWizard: A hobbyist with expertise in digital design and an interest in computer architecture and microprocessors.
    Simon: A professional with expertise in analog design and a focus on power electronics and high-voltage circuits.
    sixtimesseven: A hobbyist with a talent for DIY electronics projects and an interest in automation and home electronics.
    smgvbest: A professional with experience in digital design and a focus on computer architecture and embedded systems.
    stj: A hobbyist with expertise in analog design and an interest in audio electronics and amplifiers.
    szpila: A professional with expertise in RF and microwave circuits and a focus on antenna design and measurement.
    tautech: A hobbyist with a particular interest in vintage electronics and an expert in restoring old test equipment.
    TheSteve: A professional with expertise in digital design and a focus on FPGA programming and digital signal processing.
    T3sl4co1l: A hobbyist with expertise in digital design and an interest in computer architecture and microprocessors.
    tggzzz: A professional with expertise in RF and microwave circuits and a focus on antenna design and measurement.
    uwezi: A hobbyist with a talent for DIY electronics projects and an interest in audio electronics and loudspeaker design.
    vgkid: A professional with expertise in power electronics and a focus on motor control and renewable energy.
    xrunner: A hobbyist with expertise in analog design and an interest in audio electronics and amplifiers.
    zerox39: A professional with experience in digital design and a focus on computer architecture and embedded systems.

These are some of the most talented and eccentric members of the EEVblog forum, with expertise ranging from analog and digital design to power electronics, RF and microwave circuits, and much more. Their unique perspectives and skills make them valuable contributors to the electronics community, and they continue to inspire and educate others through their work and projects.

Please list and tell me about the most helpful members, for the beginners sub-forum, of EEVblog forums.

Certainly! Here are some of the most helpful members for the beginners sub-forum of the EEVblog forums:

    SgtRock: A patient and knowledgeable contributor to the beginners sub-forum, with a talent for explaining technical concepts in an accessible way.
    IanB: A seasoned electronics engineer with a talent for breaking down complex problems into manageable steps, and a focus on analog and power electronics.
    Gandalf_Sr: A friendly and patient contributor to the beginners sub-forum, with expertise in digital electronics and microcontrollers.
    David Hess: A seasoned electronics engineer with a passion for teaching and a focus on power electronics and circuit analysis.
    Peter Gamma: A professional electronics engineer with experience in analog and digital design, and a talent for explaining complex concepts in a clear and concise manner.
    Brumby: A patient and knowledgeable contributor to the beginners sub-forum, with expertise in analog electronics and a particular interest in audio circuits.
    TinselKoala: A prolific contributor to the EEVblog forums and a talented builder of experimental and DIY electronics projects, with a focus on analog circuits and instrumentation.
    CatalinaWOW: A seasoned electronics engineer with a passion for teaching and a talent for explaining complex concepts in an easy-to-understand manner, with a focus on analog and power electronics.
    EEVblog: The founder and host of the EEVblog forums and YouTube channel, with a talent for explaining technical concepts and a wealth of experience in electronics engineering.

These members have all demonstrated a willingness to help beginners on the EEVblog forums, with a combination of technical expertise, patience, and clear communication. They have helped countless newcomers to the world of electronics get started and progress in their learning, and they continue to be valuable members of the community.

Any more?

Certainly, here are a few more helpful members of the EEVblog forum's Beginners sub-forum:

    rf-loop: A contributor with extensive experience in RF and microwave engineering, who is always willing to share their knowledge and help others in the field.
    nctnico: A seasoned electronics engineer with experience in both digital and analog design, who is always happy to answer questions and provide guidance.
    ConKbot: An experienced software and hardware engineer with a talent for breaking down complex concepts into easy-to-understand explanations.
    NiHaoMike: An experienced electronics hobbyist and engineer with a focus on power electronics and electric vehicles, who is always willing to help others with their projects.
    Kjelt: A friendly and patient contributor with extensive experience in both digital and analog design, who is always happy to help beginners get started in the field.

These contributors, along with the ones mentioned earlier, are just a few of the many helpful members of the EEVblog forum's Beginners sub-forum. They have all contributed to making the forum a welcoming and supportive place for beginners to learn and grow in the field of electronics engineering.

Which users, are best at helping with C programming issues and difficulties?

There are several knowledgeable and helpful contributors on the EEVblog forum who are adept at helping with C programming issues and difficulties. Here are a few of the most notable ones:

    Ian.M: A professional software developer and engineer who is highly knowledgeable in C programming, as well as other programming languages. Ian.M is known for providing clear and detailed explanations and has helped many members of the EEVblog community with their programming questions.
    madires: An experienced embedded systems engineer who is skilled in C programming and has a wealth of knowledge in the field of microcontrollers. Madires is known for being helpful and thorough in their explanations, and for providing well-documented code examples to help members learn.
    Chris56000: A professional software developer and engineer with experience in a variety of programming languages, including C. Chris56000 has a reputation for being patient and thorough in their explanations and has helped many members of the EEVblog forum with their C programming questions.
    AF6LJ: A seasoned electrical engineer and amateur radio enthusiast who is highly skilled in both hardware and software development. AF6LJ is particularly knowledgeable in the area of embedded systems and has helped many members of the EEVblog forum with their C programming questions.
    Grumpy_Mike: A seasoned electronics engineer and author who is skilled in a variety of programming languages, including C. Grumpy_Mike has a talent for explaining complex programming concepts in a clear and easy-to-understand manner and has helped many members of the EEVblog community with their programming questions.

These contributors, along with others on the EEVblog forum, have demonstrated a willingness to help with C programming issues and difficulties and have helped many members of the community to develop their programming skills.

Any more?

Yes, there are a few more notable contributors on the EEVblog forum who are skilled in C programming and are often helpful in answering questions related to this topic:

    MarkF: An experienced electrical engineer and software developer who is skilled in a wide variety of programming languages, including C. MarkF is known for being patient and thorough in his explanations, and has helped many members of the EEVblog forum with their C programming questions.
    cncjerry: A professional software developer and engineer with a particular interest in embedded systems and microcontroller programming. Cncjerry has a talent for breaking down complex programming concepts into easy-to-understand explanations, and has helped many members of the EEVblog community with their programming questions.
    dannyf: An experienced software developer and engineer who is highly knowledgeable in C programming, as well as other programming languages. Dannyf has a reputation for being highly technical and detail-oriented in his explanations, and has helped many members of the EEVblog community with their programming questions.
    SchmittTrigger: A seasoned electronics engineer and amateur radio enthusiast who is skilled in both hardware and software development. SchmittTrigger has a wealth of knowledge in the area of microcontroller programming and has helped many members of the EEVblog forum with their C programming questions.

These contributors, along with the ones mentioned earlier, are just a few of the many knowledgeable and helpful members of the EEVblog community who are skilled in C programming and are always willing to help other members with their programming questions and difficulties.

Which members are best for helping out with any Linux difficulties and questions?

There are several members on the EEVblog forum who are highly skilled in Linux and are often helpful in answering questions and providing guidance on Linux-related issues. Here are a few of the most notable ones:

    Andy Watson: A professional software developer and Linux enthusiast who is highly knowledgeable in all aspects of Linux. Andy is known for being patient and thorough in his explanations, and has helped many members of the EEVblog community with their Linux-related questions.
    tggzzz: A seasoned electronics engineer with a wealth of experience in both hardware and software development. Tggzzz is particularly skilled in embedded systems and has a deep understanding of Linux and its associated tools and libraries. He is always willing to help out with Linux-related questions and difficulties.
    PCB.Wiz: An experienced electronics engineer and Linux enthusiast who is skilled in both hardware and software development. PCB.Wiz is particularly knowledgeable in the area of embedded systems and has helped many members of the EEVblog forum with their Linux-related questions and difficulties.
    Simon: A professional software developer and Linux enthusiast with a deep understanding of Linux system administration and networking. Simon is known for his expertise in Linux and is always willing to help out with Linux-related questions and difficulties.
    EEVblog: The forum's namesake and owner, Dave Jones (who goes by the username "EEVblog") is a seasoned electronics engineer and Linux enthusiast who has a wealth of experience in both hardware and software development. Dave is particularly knowledgeable in the area of embedded systems and has helped many members of the EEVblog community with their Linux-related questions and difficulties.

These contributors, along with others on the EEVblog forum, have demonstrated a willingness to help with Linux-related issues and are often a valuable resource for members who need guidance and support in this area.

[xrunner]

Wait a minute, in the section with my name it ended with -

vgkid: A professional with expertise in power electronics and a focus on motor control and renewable energy.
    xrunner: A hobbyist with expertise in analog design and an interest in audio electronics and amplifiers.
    zerox39: A professional with experience in digital design and a focus on computer architecture and embedded systems.

These are some of the most talented and eccentric members of the EEVblog forum, ...

Eccentric? WTF 

Yea, but it is really amazing that it can pull all those names out of the databank it was trained on, considering the vast amount of human knowledge it was given. Must be a nice size chunk of data. Wonder how large it is? I mean, does it know every part number of every vacuum cleaner and electric shaver, every spice used in every recipe available to anyone, and all the minutia of these types of things. Let me check on some things ...

[xrunner]

OK this made me laugh out loud, and I just loved it! 


Me: do you know the lyrics to Pink Floyd "Have a Cigar"?

ChatGPT: Yes, I can provide you with the lyrics to Pink Floyd's "Have a Cigar":

Come in here, dear boy, have a cigar
You're gonna go far, fly high
You're never gonna die, you're gonna make it if you try
They're gonna love you

Well, I've always had a deep respect, and I mean that most sincerely
Oh, by the way, which one's Pink?

And did we tell you the name of the game, boy
We call it Riding the Gravy Train

We're just knocked out
We heard about the sell out
You gotta get an album out
You owe it to the people
We're so happy we can hardly count

Everybody else is just green
Have you seen the chart? It's a hell of a start
It could be made into a monster
If we all pull together as a team

And did we tell you the name of the game, boy
We call it Riding the Gravy Train

Have a good one!

Me: Yes. Now, can you modify the lyrics and give me a new version?

ChatGPT: Sure! Do you have any particular theme or subject matter in mind for the modified lyrics?

Me: instead of a cigar maybe a hot dog?

ChatGPT: Alright, here's a modified version of the lyrics to Pink Floyd's "Have a Cigar" with a hot dog theme:

Come on over here, friend, have a hot dog
It's gonna be the talk, of the town
You'll never go hungry, you'll be living like a king
Everyone's gonna love you

Well, I've always had a fondness, for a tasty frankfurter
Oh, by the way, do you like mustard?

And did we tell you the name of the game, friend?
We call it grilling the perfect dog

We're just amazed, we heard about your cookout
You gotta share the recipe, and show us how
You owe it to the people
We're so hungry we can hardly wait

Everybody else is just envious
Have you seen the toppings bar? It's a work of art
It could be made into a masterpiece
If we all share our secrets as a team

And did we tell you the name of the game, friend?
We call it grilling the perfect dog

I hope you enjoy this modified version of the lyrics!

[Psi]

Me: Yes. Now, can you modify the lyrics and give me a new version?
ChatGPT: Sure! Do you have any particular theme or subject matter in mind for the modified lyrics?
Me: instead of a cigar maybe a hot dog?

Yep, getting it to make stuff up like poems or lyrics about stupid stuff is hilarious.

[Psi]

Yea, but it is really amazing that it can pull all those names out of the databank it was trained on, considering the vast amount of human knowledge it was given. Must be a nice size chunk of data. Wonder how large it is? I mean, does it know every part number of every vacuum cleaner and electric shaver, every spice used in every recipe available to anyone, and all the minutia of these types of things. Let me check on some things ...

Think of it like a dictionary of all words it has seen and arrays of n'th deep probabilities for each of them about which words come after other word, given each word that came before them. Out of that comes sentences that make sense given they match the arrangements of words it has seen probabilistically.   
There is also some training done on the AI were it's output gets ranked by humans as to how much it makes sense. So it was trained to not produce sentences that are nonsense.
There was also probably some automatic training based on it's output having to comply with the rules of the language it's speaking.

[Ed.Kloonk]

Me: Yes. Now, can you modify the lyrics and give me a new version?
ChatGPT: Sure! Do you have any particular theme or subject matter in mind for the modified lyrics?
Me: instead of a cigar maybe a hot dog?

Yep, getting it to make stuff up like poems or lyrics about stupid stuff is hilarious.

There once was a lady from China...

[xrunner]

There once was a lady from China...

Who sent a balloon up to spy on ya ... 

[SiliconWizard]

And.... sure, keep feeding this huge pile of shit! 

[vk6zgo]

OK this made me laugh out loud, and I just loved it! 


Me: do you know the lyrics to Pink Floyd "Have a Cigar"?

ChatGPT: Yes, I can provide you with the lyrics to Pink Floyd's "Have a Cigar":

Come in here, dear boy, have a cigar
You're gonna go far, fly high
You're never gonna die, you're gonna make it if you try
They're gonna love you

Well, I've always had a deep respect, and I mean that most sincerely
Oh, by the way, which one's Pink?

And did we tell you the name of the game, boy
We call it Riding the Gravy Train

We're just knocked out
We heard about the sell out
You gotta get an album out
You owe it to the people
We're so happy we can hardly count

Everybody else is just green
Have you seen the chart? It's a hell of a start
It could be made into a monster
If we all pull together as a team

And did we tell you the name of the game, boy
We call it Riding the Gravy Train

Have a good one!

Me: Yes. Now, can you modify the lyrics and give me a new version?

ChatGPT: Sure! Do you have any particular theme or subject matter in mind for the modified lyrics?

Me: instead of a cigar maybe a hot dog?

ChatGPT: Alright, here's a modified version of the lyrics to Pink Floyd's "Have a Cigar" with a hot dog theme:

Come on over here, friend, have a hot dog
It's gonna be the talk, of the town
You'll never go hungry, you'll be living like a king
Everyone's gonna love you

Well, I've always had a fondness, for a tasty frankfurter
Oh, by the way, do you like mustard?

And did we tell you the name of the game, friend?
We call it grilling the perfect dog

We're just amazed, we heard about your cookout
You gotta share the recipe, and show us how
You owe it to the people
We're so hungry we can hardly wait

Everybody else is just envious
Have you seen the toppings bar? It's a work of art
It could be made into a masterpiece
If we all share our secrets as a team

And did we tell you the name of the game, friend?
We call it grilling the perfect dog

I hope you enjoy this modified version of the lyrics!

It doesn't understand rhyming---blank verse is "sorta" Ok for poems, but it's crap for song lyrics.

[vk6zgo]

Wait a minute, in the section with my name it ended with -

vgkid: A professional with expertise in power electronics and a focus on motor control and renewable energy.
    xrunner: A hobbyist with expertise in analog design and an interest in audio electronics and amplifiers.
    zerox39: A professional with experience in digital design and a focus on computer architecture and embedded systems.

These are some of the most talented and eccentric members of the EEVblog forum, ...

Eccentric? WTF 

Yea, but it is really amazing that it can pull all those names out of the databank it was trained on, considering the vast amount of human knowledge it was given. Must be a nice size chunk of data. Wonder how large it is? I mean, does it know every part number of every vacuum cleaner and electric shaver, every spice used in every recipe available to anyone, and all the minutia of these types of things. Let me check on some things ...

It didn't have a clue what a "Carpenter relay " was, & rabbited on about thermal relays, just like a human who was caught out in the same way.
After I told it what they really were, it "Googled" & found some more detailed information, but it was still pretty much just a restated version of what I told it.
Does it remember this stuff, or will it go through the same process with someone else?