Author Topic: EEVblog 1601 - How VFD (Vacuum Fluorescent) Displays Work  (Read 2762 times)

0 Members and 1 Guest are viewing this topic.

Offline EEVblogTopic starter

  • Administrator
  • *****
  • Posts: 37742
  • Country: au
    • EEVblog
EEVblog 1601 - How VFD (Vacuum Fluorescent) Displays Work
« on: February 27, 2024, 03:39:30 am »
How VFD (Vacuum Fluorescent) Displays Work.



Extracted from a hacking video #717:
 
The following users thanked this post: SeanB

Offline floobydust

  • Super Contributor
  • ***
  • Posts: 7000
  • Country: ca
Re: EEVblog 1601 - How VFD (Vacuum Fluorescent) Displays Work
« Reply #1 on: February 27, 2024, 04:23:02 am »
I had a moment rejuvenating a 34401a VFD, connected power to it and it didn't light up. Applied filament power and +30V on the segments, grid floating.
I expected segments to light (normally on unless the grid biased negative) but it stayed dark.
Turns out the "grid" works like a screen grid, not a control grid.

I do the usual filament bake off up to 2x Vfil absolute max, and then also a grid bake off was needed. There is some buildup on it as well.
 

Offline Ian.M

  • Super Contributor
  • ***
  • Posts: 12862
Re: EEVblog 1601 - How VFD (Vacuum Fluorescent) Displays Work
« Reply #2 on: February 27, 2024, 06:33:02 am »
Useful VFD links:
Futaba's VFD Characteristics & Operation guide AN-E-1103A http://www.vwlowen.co.uk/arduino/vfd/VFD-Application-Note.pdf
Noritake's A Guide to Fundamental VFD Operation
https://www.noritake-elec.com/technology/general-technical-information/vfd-operation
 

Offline ksio89

  • Contributor
  • Posts: 27
  • Country: br
Re: EEVblog 1601 - How VFD (Vacuum Fluorescent) Displays Work
« Reply #3 on: February 28, 2024, 04:45:23 pm »
I had a Sony MHC-DX7 shelf stereo/mini system that bought in 2000 or 2001, was the display a VFD or just an LCD one?




 

Offline floobydust

  • Super Contributor
  • ***
  • Posts: 7000
  • Country: ca
Re: EEVblog 1601 - How VFD (Vacuum Fluorescent) Displays Work
« Reply #4 on: February 29, 2024, 07:17:21 pm »
VFD's are superiour for readability in sunlight and low temp (below -30°C) I used them a lot in industrial panels that are located outdoors. Instead of low temp fluid and heaters in LCD's.
Noritake iTron/Futaba were kings making the best VFD's but LCD's took over and had the lower power consumption, you don't need a few watts for the filaments.

Interesting the Korg Nutube 6P1 (by Noritake) is just a VFD as a low voltage twin triode. They're just exploiting the non-linearities I think THD 1-20% very fuzzy and perhaps corny.

Sony MHC-DX7 uses a VFD https://elektrotanya.com/sony_mhc-dx7.pdf/download.html#dl
 
The following users thanked this post: ksio89

Offline thm_w

  • Super Contributor
  • ***
  • Posts: 6389
  • Country: ca
  • Non-expert
Re: EEVblog 1601 - How VFD (Vacuum Fluorescent) Displays Work
« Reply #5 on: February 29, 2024, 10:31:13 pm »
I had a Sony MHC-DX7 shelf stereo/mini system that bought in 2000 or 2001, was the display a VFD or just an LCD one?



The manual calls it "fluorescent indicator tube" so its some form of VFD.
Profile -> Modify profile -> Look and Layout ->  Don't show users' signatures
 
The following users thanked this post: ksio89

Offline Ranayna

  • Frequent Contributor
  • **
  • Posts: 865
  • Country: de
Re: EEVblog 1601 - How VFD (Vacuum Fluorescent) Displays Work
« Reply #6 on: March 01, 2024, 01:47:28 pm »
May i ask what led you to extracting this part from an old video?
Not that i mind really, it was a bit of a "blast from the past" :D And i remembered many points from the original video.

Is it just to make this aspect easier to search for and find this video?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf