Author Topic: TAKEN: Raspberry Pi Compute Module 4 - needs new connector (GTA area, Canada)  (Read 666 times)

0 Members and 1 Guest are viewing this topic.

Offline HogwildTopic starter

  • Frequent Contributor
  • **
  • Posts: 260
  • Country: ca
FREE: Raspberry Pi Compute Module 4 Model CM4104032. (GTA Area of Canada)


It was basically unused, but needs a new board connector. The original connector has damaged pins.


- Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC at 1.5GHz
- 4GB RAM
- 32GB eMMC storage
- Wireless connectivity

I believe the connector needed is a Hirose 100-pin high-density DF40C-100DS-0.4v 1.5mm stack. Not sure if it's the 1.5mm model.
« Last Edit: September 08, 2026, 10:31:32 pm by Hogwild »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf