FS: CISPR 11 conducted noise LISN with mode separator

[Tantratron]

Hello, my company based in France is selling a bundle of EMC/EMI test equipment which was used for a german contract (EMC pre-compliance engineering under UV induction lighting CISPR 11). In the pictures, you'll see an old but very resilient CHASE Line Impedance Stabilization Network with two RF outputs (Line and Neutral) along with almost new tekbox separator to extract common mode noise and differential mode noise. The LISN can go very high on monophasic power which explains why P17-32A connector, I'll provide the adapter cables on the picture (4 m input power and 1m power to DUT out).

Excluding shipment cost which depends of destination country and insurance level, the bundle is sold 1000 € ex-VAT or best offer. If you have a registered company in Europe with valid VAT number or living outside of Europe export zone, the french 20% VAT will not apply (reverse charge), if you are a private person then +20 % VAT added.

Thank you and best regards, Albert Roseiro (tantratron SAS owner)

[Tantratron]

The LISN could be sold without cables and CM/DM separator, the price 600 € ex-VAT ex-shipment or best offer.

CHASE EMC CFLN 8304: 2x50 uH 25 A continous DC-60 Hz 350 V (Line-ground) DC-60 Hz 700 V (Line-Line) 150 KHz - 30 MHz