Author Topic: SOLD: (worldwide) Kingst Logic Analyser 16CH 200MHz 1Gb RAM +-50v inputs PWM 1p  (Read 1052 times)

0 Members and 1 Guest are viewing this topic.

Offline picitupTopic starter

  • Regular Contributor
  • *
  • Posts: 240
  • Country: gb
Hi All

I have a brand new one that's surplus to requirements on eBay, going off at 20:00 GMT for 1p tonight here:

https://www.ebay.co.uk/itm/264509612291

The basic specs are:

  • 200Msa @16CH continuous
    1Gbit on board RAM
    Compression around 10:1 (run length encoding)
    Range of I/O threshold voltages from 0.9v to 5v and custom.
    2x PWM outputs, controllable in software
    Free software at http://www.qdkingst.com/en/download
    SDK for custom drivers
    Generous input protection for +50v to -50v!
    Can be used with on board ram or direct via USB for longer samples
    Silicone super flexible Dupont cables and USB cable
    Expected to be supported in the future by PulseView (https://sigrok.org/wiki/Kingst_LA2016)
For more detail visit http://www.qdkingst.com/en/products and http://www.qdkingst.com/en/download

Cheers

Steve
« Last Edit: November 01, 2019, 04:46:06 pm by picitup »
If you know what you're doing, then you're not learning anything.
 

Offline picitupTopic starter

  • Regular Contributor
  • *
  • Posts: 240
  • Country: gb
Hi all

The auction is finishing tonight just after 19:00 GMT.

Come and get it while it's hot!  ;D
If you know what you're doing, then you're not learning anything.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf