Author Topic: Video - Circuitstudio panel layout  (Read 10254 times)

0 Members and 1 Guest are viewing this topic.

Offline HarvsTopic starter

  • Super Contributor
  • ***
  • Posts: 1204
  • Country: au
Video - Circuitstudio panel layout
« on: March 27, 2017, 11:08:27 pm »
Dealing with laying out panels in Circuitstudio.

https://youtu.be/lXM_3_9vTBI
 
The following users thanked this post: negativ3, onesixright, voltsandjolts, josem, slothsd, songshome, mars01, ubbut, Kasper

Offline voltsandjolts

  • Supporter
  • ****
  • Posts: 2452
  • Country: gb
Re: Video - Circuitstudio panel layout
« Reply #1 on: March 28, 2017, 09:46:49 am »
Thanks for another useful video Harvs.

I have attached a CS PCB doc with an embedded board array.
 
The following users thanked this post: Harvs, negativ3, songshome, mars01, ubbut, Kasper

Offline trevwhite

  • Frequent Contributor
  • **
  • Posts: 946
  • Country: gb
Re: Video - Circuitstudio panel layout
« Reply #2 on: March 28, 2017, 10:09:03 am »
Thanks, both. The videos are great and appreciate the file being attached.
 

Offline HarvsTopic starter

  • Super Contributor
  • ***
  • Posts: 1204
  • Country: au
Re: Video - Circuitstudio panel layout
« Reply #3 on: March 28, 2017, 10:27:17 am »
Thanks for another useful video Harvs.

I have attached a CS PCB doc with an embedded board array.

Thanks for that, I did mean to post that here but I forgot...
 

Offline veenie

  • Newbie
  • Posts: 1
  • Country: nl
Re: Video - Circuitstudio panel layout
« Reply #4 on: June 18, 2017, 09:07:56 pm »
seems the latest update has wrecked this option  |O
Worked fine an couple of weeks ago but doesn't seem to work anymore.
File won't be opend by circuitstudio 1.4 build 84
 

Offline HarvsTopic starter

  • Super Contributor
  • ***
  • Posts: 1204
  • Country: au
Re: Video - Circuitstudio panel layout
« Reply #5 on: June 18, 2017, 11:38:20 pm »
seems the latest update has wrecked this option  |O
Worked fine an couple of weeks ago but doesn't seem to work anymore.
File won't be opend by circuitstudio 1.4 build 84

Try the attached, this works fine for me in that build...
 
The following users thanked this post: negativ3

Offline JamesH-AltiumOfficial

  • Contributor
  • Posts: 40
  • Country: au
Re: Video - Circuitstudio panel layout
« Reply #6 on: June 20, 2017, 12:46:05 pm »
Hi veenie,

I can't think of any changes in 1.4 that would change that functionality.

Best regards,

James Harriman
Altium
 

Offline GlowingGhoul

  • Regular Contributor
  • *
  • Posts: 236
Re: Video - Circuitstudio panel layout
« Reply #7 on: June 21, 2017, 03:08:36 pm »
seems the latest update has wrecked this option  |O
Worked fine an couple of weeks ago but doesn't seem to work anymore.
File won't be opend by circuitstudio 1.4 build 84

No problem here either.
 

Offline Alexandre1978

  • Newbie
  • Posts: 4
  • Country: ch
Re: Video - Circuitstudio panel layout
« Reply #8 on: November 27, 2017, 02:31:57 pm »
Hi and thanks for sharing !
I have tried it, and tought to create gerbers from this panel.
But, I'm surprised that there are only PCB's with components, and NO tracks, neither top nor bottom.
Also in video, it seems to me there are no visible tracks.
Should'nt there be tracks?

Thanks in advance,
   Alexandre
 

Offline Alexandre1978

  • Newbie
  • Posts: 4
  • Country: ch
Re: Video - Circuitstudio panel layout
« Reply #9 on: November 27, 2017, 03:12:05 pm »
Sorry, my failure. Seems to work fine !
 

Offline satoshi

  • Contributor
  • Posts: 12
  • Country: ad
Re: Video - Circuitstudio panel layout
« Reply #10 on: March 25, 2023, 01:47:06 am »
Very helpful. Don't forget to sync the layer stack up by saving the one from the original board and loading it into the panel.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf