Hello,
I'm designing a PCB to interface with an OpalKelly XEM7310 that I plan to configure with some open source firmware. I'm trying to connect the PCB traces to the correct pads for the PCB/XEM7310 pin connector so that the firmware will not require modification for different pins. However, I'm not finding an I/O pin map for the XEM7310 online like one might find for a microcontroller. Opal Kelly does explain which MC1/MC2 pin that the FPGA maps to, but I don't see where it says which MC1/MC2 pin is which on the XEM7310 (nor do I really understand what MC1/MC2 means). Am I misunderstanding something about the way FPGA pins work or have I not found the proper documentation yet? If it's the latter case, does anyone know where I can find the pin map that I'm looking for?
OS Firmware Documentation:
https://intantech.com/files/Intan_RHD_XEM7310_interface.pdfPCB/XEM7310 pin connector:
https://www.samtec.com/products/bteOpal Kelly XEM7310 Pin Reference:
https://pins.opalkelly.com/pin_list/XEM7310