I have tested the following solution to run the Scope with all licenses and without lan-problems:
First, you need telnet access to perform the hack (in future a CAB were nice) und running Firmware 2.41.
1. Login with telnet in your scope
2. Stop software with "processmgr kill infiniivisionlauncher.exe"
3. Copy the file \program files\infiniivision\infiniivisioncore.dll to the usb stick
4. Patch the dll at position 0x027C0E8. Change the bytes from "04 00 a0 e1" to "00 00 a0 e3"
5. Copy the patched dll to "\secure\"
6. Create a file "startinfiniivision.cmd" with this content:
processmgr kill infiniivisionlauncher.exe
copy \secure\InfiniiVisionCore.dll "\program files\infiniivision\InfiniiVisionCore.dll"
"\program files\infiniivision\infiniivisionlauncher.exe" -l all -l BW50 -l SCPIPS -l SGMC -l CABLE
7. Copy this file to "\secure\"
8. Create a link file with the following content and install the link with the LinkInstallerCab:
50#\windows\cmd.exe /c \Secure\startinfiniivision.cmd
9. done!
Your Scope runs without problems and all liceses are activated
Uninstall the hack:
1. Remove the link with the linkInstallerCab
2. Login into the scope
3. Delete created files on with "del \secure\startinfiniivision.cmd" and "del \secure\InfiniiVisionCore.dll"
4. Done!
Is it possible to create a CAB-Installfile with this steps like the LinkInstallerCab, but i don't know how i can create the CAB-File