Does the new firmware v00.01.04.00.05 fix the problems described above at least partially? Has anyone tested?
v00.01.04.00.05 2019-03-06
- Improving the performance of overshort in CC mode
- Improving the Slew Voltage Drop Perfomance
- Increase the recording content of battery mode,"mAH" "wh" "time"
- Modifyed the bug in slewrate
- Increased SCPI commands for battery mode
- Increased SCPI commands for OCP mode
- Increased SCPI commands for OPP mode
https://beyondmeasure.rigoltech.com/acton/ct/1579/p-00ac/Bct/-/-/ct50_0/1?sid=TV2%3AQ2jKaGpUj
Does anyone know if Rigol added the possibility of pulling energy from the battery app other than in CC mode for the DL3031A?
Just for the record:
Rigol DL3000 option licenses are different from all previous Rigol equipments. They don't use ECC and use only a cascade of CRC-16s.
When you change the models to the "-A" versions, all the 7 options get officially activated and no license is needed.
Rigol DL3000 S/N: DL3A123456789
Official License Trial License (2160 min)
DL3-LAN LZKG2RLWYL7N4XVTTDUKK83R9TZT L34EWCRF9L7NDUNUFSSE7HAW7QPZ
DL3-DIGITAL-IO UUQU62UJEL7NF7QUWRSD82KP74KF 66EZYHPWMK7NDC7YAE3LNBN9YRTJ
DL3-HIRES 8LXCTCM9HL7N7EDR5GXDD68XVSW7 B32T7R3J8L7NSTGWKFHXHQZLSP4E
DL3-RIPPLE MSGWQHXPQK7NEZNW8WU7ZGYT54MR M5WD32HHKK7NLAQRVQ5ZE8P9TTWK
DL3-REST EL7NM66XUL7NRXD9GXZ9V3BLPWZV VY85FMJTFL7NURJ7YCSTY5NQM4EV
DL3-SlewRate E4T9HP54EL7NY2T7ZP5PRSFFXFHS FUFHZSEDTK7NVCT8QUSDP9SKWV66
DL3-Freq KSCLAMYZZK7NTHE2LAD7QL8ZLPMP UDG7J6P3EL7NBN844ZR73MJ9EL3R
BTW, the FW contains these Model Types:
00 - DL3021 03 - DL3021A
01 - DL3031 04 - DL3031A
02 - DL3051 05 - DL3051A <- it seems this line hasn't seen the light of day
Will release new firmware and two new license "DL3-RIPPLE" and "DL3-REST" ?
Has anyone flashed the new firmware (1.04 / 1.05) and then tried the battery discharge app? The new firmware broke that feature for me, load wont go above 0.1A regardless of settings. I found 1.02 firmware hosted online and rolled it back, and suddenly it works fine again.
Curious to see if anyone can replicate that or if it's just mine.
Reverse Voltage Protection (LRV/RRV)
When the polarity of input terminals (except the Sense terminals) and that of the output terminals of the DUT are in wrong connection, the load's input will be automatically turned off and the load will stop sinking the current. At this time, the beeper sounds, and a prompt message is displayed, "Reverse connection!" You can press OK to exit the prompt message. Note: If the reverse current exceeds the rated current,