The scope came in today! Quick delivery and good packaging. I was so excited to start
playing experimenting with this scope, so of course I used the square wave generated by the scope, and was so happy when I saw it! In addition to that, I decided to try it with a "signal generator" consisting of an audio plug connected to my PC and using an online tone generator. With this I made a simple sine wave and, with some experimenting and learning how to use the scope, I was able to get both to display with each other. Obviously, I have much more practical use for this to come, but I just wanted to mess around with it as I'm learning my way around the scope.
The only oddity is that it is missing a ground lead on one of the probes. Obviously, I am totally fine with this, and I don't mean to be complaining. I'm still beyond overjoyed with this scope, and am incredibly grateful for it. Just thought that I'd note everything about it. Once again, thank you so much to those who organized this contest, and especially to dson!
Wow, that was fast. Good to see you've got it up and running. Maybe drop bson a message to see if he has the ground lead lying around somewhere. Otherwise, 100 MHz probe kits (P6100) that are similar to the Rigol are available inexpensively (less than $10 for a pair) on eBay and Aliexpress. There are threads about them on the forum. Never hurts to have some extras.
Congratulations Yami! Looks like I became a Noob just a hair too late.
Oops, I had to dig around to find all the probe bits, and I'm sure the ground lead will turn up. When it does I'll put it in an envelope and send to you.
Edit: I think it found its way onto a LeCroy PP020 and since this is the odd one at 4.75" (120mm) I'll mail it to you.
Congrats to the winners!!
Thanks to all the competitors!
And even bigger thanks to the organizers and prize donors!
Michael
The scope came in today! Quick delivery and good packaging. I was so excited to start playing experimenting with this scope, so of course I used the square wave generated by the scope, and was so happy when I saw it! In addition to that, I decided to try it with a "signal generator" consisting of an audio plug connected to my PC and using an online tone generator. With this I made a simple sine wave and, with some experimenting and learning how to use the scope, I was able to get both to display with each other. Obviously, I have much more practical use for this to come, but I just wanted to mess around with it as I'm learning my way around the scope.
The only oddity is that it is missing a ground lead on one of the probes. Obviously, I am totally fine with this, and I don't mean to be complaining. I'm still beyond overjoyed with this scope, and am incredibly grateful for it. Just thought that I'd note everything about it. Once again, thank you so much to those who organized this contest, and especially to dson!
God man, its so pretty, congrats again. And congrats to the other winners (I think I forgot you the first time).
Well I know at least one of my shipments was left at a front door ...
I have been at my front door all day lol
Congrats
yami759 as usual I was late to the party
Enjoy your new
toy tool
I have been at my front door all day lol
Somebody snuck up and stole it!
LOL - no it was the other guy, yours is 'posed to arrive today too though. Keep a watch on that door!
Last update
I have been at my front door all day lol
Somebody snuck up and stole it!
LOL - no it was the other guy, yours is 'posed to arrive today too though. Keep a watch on that door!
i would go on the hunt for my package if someone took it lol... Last update was on the 10th but yea i will be at the front door till last call lol
Last update was on the 10th but yea i will be at the front door till last call lol
UPS tracking is not working correctly. Yesterday it showed more tracking than it does now - for both shipments. Remain calm.
Nothing today, ill be sure to be by the door tomorrow, Just an update for everyone . Thank you
Nothing today, ill be sure to be by the door tomorrow, Just an update for everyone . Thank you
Yea something is wrong ... will have to call UPS and have them explain what the hell we're looking at on the tracking. It probably fell off the truck.
It's lost.
Called UPS and the first thing the guy said after he ran the tracking number was "It's lost sir". He said packages were updated every 24 hours, and it hadn't been updated since the 10th. I have to get the info I requested in the PM I sent you, and go to the UPS store and let them take it from there. What are you going to do these days. I don't trust the USPS that much either, so I use UPS and this happens.
Always remember, and never forget, this time-honored phrase -
"No good deed ever goes unpunished"
I have a few "teaser" images to post here; I've been designing in KiCAD for a couple days and reading more ("oh ... I'll need a separate analog ground-plane? Well then...") so will breadboard and post some images of the equipment in use very soon.
Awesome - at least yours made it.
But good news - a replacement prize for Seaofdep has been offered by another member! I will mention who if they wish. All's well that ends well!
I have a few "teaser" images to post here; I've been designing in KiCAD for a couple days and reading more ("oh ... I'll need a separate analog ground-plane? Well then...") so will breadboard and post some images of the equipment in use very soon.
Looking good, Chris. I can't wait to see/hear more about your flight sim projects. I haven't flown much after FSX was shuttered.
... But good news - a replacement prize for Seaofdep has been offered by another member! I will mention who if they wish. All's well that ends well!
I'll get this out to Seaofdep early next week as a replacement for the lost prize. An ANENG 8001, a Klein MM2000, a nice pair of Agilent leads and a thermocouple. There may be room in the box for a few other odds and ends too...
... But good news - a replacement prize for Seaofdep has been offered by another member! I will mention who if they wish. All's well that ends well!
I'll get this out to Seaofdep early next week as a replacement for the lost prize. An ANENG 8001, a Klein MM2000, a nice pair of Agilent leads and a thermocouple. There may be room in the box for a few other odds and ends too...
Thank you, words cant describe how grateful i am and how much i appreciate this, I am truly lost for words. Thank you all so much
Thank you ModemHead! Seaofdep gets an even better prize and I got his phone number so I can have them do their investigation and get my money back from Uncertain Parcel Service.
... But good news - a replacement prize for Seaofdep has been offered by another member! I will mention who if they wish. All's well that ends well!
I'll get this out to Seaofdep early next week as a replacement for the lost prize. An ANENG 8001, a Klein MM2000, a nice pair of Agilent leads and a thermocouple. There may be room in the box for a few other odds and ends too...
Thanks, ModemHead! That is awesome. Not only did you redeem the lost prize, you multiplied it. And I already thought your restorations were amazing.
Thanks to xrunner and the rest of you guys for organizing and running the contest. It's a great thing to do.
The new prize package is on its way to Seaofdep via USPS Priority Mail, expected delivery is Wednesday.
I have a few "teaser" images to post here; I've been designing in KiCAD for a couple days and reading more ("oh ... I'll need a separate analog ground-plane? Well then...") so will breadboard and post some images of the equipment in use very soon.
Looking good, Chris. I can't wait to see/hear more about your flight sim projects. I haven't flown much after FSX was shuttered.
I can't wait to do more "head's-down" hardware work on this either! Another slightly more concrete image: I used the Arduino Nano v3 that you threw into the box to flash my first Arduino bootloader over to a "raw" ATMega328P-PU chip! I was then able to use a super-cheap CH340G-based USB-to-Serial setup to flash some code over to the chip. More actual images will come as I become smarter than the counter--I'm trying to figure out how it works--and as I find a mechanism (banana-plug to grabber?) to hold leads onto the circuit while taking a picture.
For now, please accept this image with my gratitude (it shows the "blink" sketch working on the 328P-PU chip, and another 328P-PU loaded up to receive the Arduino bootloader):