Hitachi v152f 15Mhz

• Hitachi v152f 15Mhz
  Posted by Skayler on 28 Aug, 2022 14:28
• Hi guys. My name is Dean.I am new here. I live in Ireland and l am electrician. I have a quastion. I buy oscilloscope Hitachi V152f but l don't have a probes. I search on internet and l didn't find nothing. Can you help me where l can find it. Thank you.
• #1 Reply
  Posted by Grandchuck on 28 Aug, 2022 16:27
• Hello and welcome Dean.  Have you looked at general purpose inexpensive probes as shown at Banggood and Aliexpress?
• #2 Reply
  Posted by Skayler on 28 Aug, 2022 16:36
• I didn't becouse l don't know what probes will work and what don't. I don't want buy something and when l connect it doesn't work. I am new in this so l don't know to muck about it. Can you send me a link from amazone or ebay what l can buy.
• #3 Reply
  Posted by rstofer on 28 Aug, 2022 17:39
• It is likely that there is a label on the panel below the BNC connectors that mentions something like 1Mohm 13 pF (from my Rigol DS1054Z) which is the standard input impedance.  Any 1 Mohm X1 probe will work.
  
  Like these:
  
  https://www.amazon.com/RioRand-PP150-Oscilloscope-Probes-Accessory/dp/B0030KWM30
  
  Or you can buy far better probes at ProbeMaster.
  
  
• #4 Reply
  Posted by Skayler on 28 Aug, 2022 17:46
• Thank you for your help.1
• #5 Reply
  Posted by rstofer on 28 Aug, 2022 19:03
• FWIW, the probes I linked will have a switch to choose between 1x and 10x.  The probe compensation adjustment applies only to the x10 range.
  
  Some scopes have a selector to choose between 1X and 10X since 10X clearly affects the display (1/10 as big) and any displayed values will be off by a factor of 10.
  
  There is a long scope tutorial linked to the start of this forum.  The creator, w2aew, works (worked) for Tektronix and he really knows about scopes.  He has a lot of introductory level videos and all are excellent.  Google for w2aew, I suppose...
  
  I like his op amp and transistor videos.  Dave has some good videos in that arena as well.
  
• #6 Reply
  Posted by Skayler on 29 Aug, 2022 13:17
• I will take a look on that videos. I like to learn about this.Thanks.