How can I change the chinese UI to english UI of my Tekway DST 1062B?

• How can I change the chinese UI to english UI of my Tekway DST 1062B?
  Posted by bibly on 17 Aug, 2011 19:22
• Hello,
  
  I need to know how to change the UI from Chinese to English or if possible both languages selectable in the menu? Could anyone help me?
  
  My scope is a DST1062B Tekway, Firmware 2.06.3(110225.0).
  
  I tried to make a FW dump as explained here: https://www.eevblog.com/forum/index.php?topic=1571.msg53336#msg53336
  But I am not sure that the scope did this dump. Remember, there message boxes are in Chinese only. 
  
  Thanks.
• #1 Reply
  Posted by bibly on 17 Aug, 2011 20:26
• tinhead helped me to change the UI:
   
  

  Quote

  110225.0 is fine, then this is probably not the newest hw1007, so you can download this here
  
  https://www.eevblog.com/forum/index.php?action=dlattach;topic=1571.0;attach=11334
  which is fw 110531.1 for Tekway 1062B
  
  and this here
  
  https://www.eevblog.com/forum/index.php?action=dlattach;topic=1571.0;attach=11517
  
  which is new english language file for that firmware
• #2 Reply
  Posted by tinhead on 17 Aug, 2011 20:26
• now as you scope is english you can use this tool
  
  https://www.eevblog.com/forum/index.php?topic=1571.msg35683#msg35683
  
  to made a dump
• #3 Reply
  Posted by bibly on 17 Aug, 2011 20:33
• Is it necessary to make a FW dump? The FW you gave me is saved on my pc.
  
   
• #4 Reply
  Posted by tinhead on 17 Aug, 2011 20:48
• depends .. imagine the NAND flash is broken (which might happens), what you will do then ?
  
  The firmware itself is only one executable, bunch of text files, but within he NAND flash is the whole Linux OS,
  manufacturer device dri´vers, additional manufacturer aplikations, the factory calibration (which match only your DSO),
  the serial number informations and so on.
  
  So did it make sense to have a backup of all these things? You decide ...
• #5 Reply
  Posted by bibly on 17 Aug, 2011 21:17
• OK, I understand. I'll do this tomorrow. 
• #6 Reply
  Posted by Mrbrillio on 22 Sep, 2011 19:33
• Hi! I'm an electric engeneering student and a new member of this community. 
  I have discovered this blog/forum some months ago and since then I have watched the Dave's videos and read a lot of topic in the forum.
  
  As you can imagine I have just bought a Tekway DST1062B in China. The problem is that i don't know how to change the language from chinese to English.
  I have read about all the topic for the 200MHz hack and I have tried alot to enable the English language but i haven't find the way.
  Can you please suggest me how to do?
  
  The firmware of my scope is 2.06.3(110225.0) that i think it's not exactly the last one .
  
  
  
• #7 Reply
  Posted by Mrbrillio on 23 Sep, 2011 21:18
• I did it! 
  At one point I thought I bricked it because it remained locked on reboot with RUN/STOP button on yellow.
  Then it take it power off for some minutes and it restarted correctly
  
  Now I have some problems with the firmware dump
  
  With the specific DST1062 dump utility i obtain this result:
  "Firmware update failed, error: 0xf7   Illegal update files detected"
  
  With the universal dump utility i obtain this result:
  "Firmware update failed, error: 0xfe   No upgrade files detected on USB device"
  
  I will retry tomorrow....
• #8 Reply
  Posted by Mrbrillio on 24 Sep, 2011 14:07
• No results 
  
  It continue to give me the same errors.
  
  Someone have any idea how to do the dump (DST1062B 110531.1)?