@blueskull in Australia I think you are responsible to a limited degree due to principles similar to the "attractive nuisance". If I understand it correctly , that an object has some intrinsic attraction but has also some hidden danger.
For example if I put up a radio tower and do not put something to stop people climbing it I am partly responsible.
PS I am NOT a lawyer.
PPS I think you were considering getting a U1461A, I am happy with mine, not cheap but a good device with set of accessories, case etc.
Here's my precious Fluke 8060A
Funny story. Dave got one of these in the mail some time ago and it looked kind of familiar to me. I vaguely remember my father having one of these on the dinner table while attempting to fix the TV. Turns out it was the exact same model and he still had it somewhere on the attic. Now it's mine
It's still working fine and doesn't appear to be wildly out of spec. Great upgrade from the cheap 3.5 digit one I used before
@blueskull I would put a "DANGER EMITS HIGH VOLTAGE FROM LEADS" label on (which is not untrue) and your multimeter will never go missing and you will meet safety issues!
Bummer re the wait, it is a good meter. Like lots of HP Ag KS stuff.
I have started doing a bit of Nixie tube experimentation and about to get my first tube (thermionic RF transceiver) it is really nice to be able to test leads etc with 1000V before you connect everything up in earnestness. A lot of leads etc the specifications often only tell you up to a few hundred V or so.
this is mine, not the best but it gets the job done mostly, had it for over 5 years and still on the original battery
Dave mentioned once that it will be cool to have his portrait on the EEVBlog DMM. Now I see where he got that idea, probably seeing Dick Smith products as a kid.
Here's my current set of DMMs that I acquired over the years.
They are positioned in order of acquisition, from left to right:
Dynatek 9020a
Voltcraft ME-32
Extech EX830
Agilent U1232A
The Agilent I got for free because it was defective, but I managed to repair it quite easily, though its life expectancy may be limited. I've been meaning to do a teardown of that one and post what I think is a design flaw.
Edit: to prevent "abuse" of this section, I moved the teardown part of the Dynatek 9020a here.
Teardown of the Agilent U1232A here.
Teardown of the Extech EX830 here.
Teardown of the Voltcraft ME-32 here.
Up to 10. Pretty soon they will take over...
Up to 10. Pretty soon they will take over...
Careful. That's how it starts.
Up to 10. Pretty soon they will take over...
Nice. It looks like you're a tenth of the way along on your eevblog oscilloscope collection, too. Only 18 more to go!
<ETA - on closer examination of the top left of the photo, perhaps only 17 more to go.>
-Pat
Looks like some upper lip fuzz. I'm going to guess 13th birthday. My parents bought me my first non tube meter.
Can you tell what it was?
Looks like some upper lip fuzz. I'm going to guess 13th birthday. My parents bought me my first non tube meter. Can you tell what it was?
Scary wallpaper?
You've gotta love old pictures where you look at them and say "what were we thinking?!?"
(Of course we'll no doubt look back 20 years from now and think the same thing of today...
)
-Pat
Mom and her wall paper. I lived through a textured phase of wall paper and I remember one was a velvet of sorts.
Hi
If you insist, here are mine
Thurlby 1905a
B&Q brand AC clamp meter(so533yx)
Tenma 72-7755 (rebadged ut70b)
Keysight U1232a
Maplins gold N21FR (rebadges standard ST21)
DT830 (hey dont laugh, it was my first meter)
I have a UT61e on the way. I just cannot resist the cheap ones.
Can you tell what it was?
Micronta 50K ohm/volt VOM with range-doubler?
@blueskull in Australia I think you are responsible to a limited degree due to principles similar to the "attractive nuisance". If I understand it correctly , that an object has some intrinsic attraction but has also some hidden danger.
For example if I put up a radio tower and do not put something to stop people climbing it I am partly responsible.
PS I am NOT a lawyer.
PPS I think you were considering getting a U1461A, I am happy with mine, not cheap but a good device with set of accessories, case etc.
What a load of crap if it is true... This is the type of thing that causes idiots to become millionaires and have more idiot children...
Yes sir! The 22-204A. I used this meter for many years.
Can you tell what it was?
Micronta 50K ohm/volt VOM with range-doubler?
Finally went around and found them all, my whole house tends to be my "lab" so they're usually pretty scattered. The DER EE is "new" and while not a multimeter per se, I'm quite taken with it so I threw it in the pic.
I don't think I'm forgetting anything... Making this list made me realize I have a serious addiction problem...
Fluke 45
Fluke 27
Fluke 27/FM
Fluke 28II
Fluke 87IV
Fluke 87V
Fluke 116
Fluke 325
Fluke 8922A
HP 3478A
HP 405AR
HP 400D
HP 331A (technically, has voltmeter mode)
Simpson 260-III
Simpson 260-V
Avo Avometer 8-MK2
Willb,
That is a nice
hoard collection
Which is you go to meter?
I have a couple of Fluke 289, but I prefer a Fluke 189. I find the 189 is more responsive, I find there is a noticeable delay with the 289s when they are auto ranging.
Regards,
Jay_Diddy_B
Which is you go to meter?
My go to meter is a Beckman RMS225. I really like the banana jack layout because I can use a standard 3/4" banana plug for the 10 amp range which very few meters can do.
I have a couple of Fluke 289, but I prefer a Fluke 189. I find the 189 is more responsive, I find there is a noticeable delay with the 289s when they are auto ranging.
The two common complaints about autoranging meters in the past when this was a new feature were that they were slow and that they had a much shorter battery life.
Willb,
That is a nice hoard collection
Which is you go to meter?
I have a couple of Fluke 289, but I prefer a Fluke 189. I find the 189 is more responsive, I find there is a noticeable delay with the 289s when they are auto ranging.
Regards,
Jay_Diddy_B
Out of all my meters I use my Fluke 45 the most I'd say. It's in a good spot on my bench. I don't keep my other Fluke meters out on my bench as they would be taking up too much space, they come out as needed. Out of my handheld Fluke meters, the 87IV (which is really a 187) is my favorite.
I'd like to use my HP 405AR more, but it needs a good 15 minutes to warm up before it's accurate, it's LOUD and it's very power hungry.
I do not own these multimeters. Photos were found on the web. They are quite special, because they have a
19999 (4 1/2) display. They are probably both from 1994.
The Finest company is not well known, but it is still alive.
http://www.finest.co.kr/
Philips
this oldies can read also nA, and resistors up to 2G