-
Market for small production runs of less than 100 boards
Posted by
MUDGEL
on 05 Nov, 2017 06:26
-
Hey guys.
Do you think there’s a niche market in Australia for someone to make and populate small runs of say less than 100 boards.
Using something like a Lite Placer to paste up and install partsannusing various home methods for etching boards etc.
Now that I see it in writing I can already imagine the answers.
Cheers,
Mike Vogel
-
-
Your cost of doign this will render you uneconomic in Australia because your costs are too high.
As for home etching, your in trouble doing before you start, just being able to do through hole plating requires quite a bit of plant..
-
#2 Reply
Posted by
Mr. Scram
on 05 Nov, 2017 07:54
-
Try to figure out what you would want to pay yourself and how much boards would cost at that rate. If that works out, start doing more research and add the costs of materials and tools.
-
#3 Reply
Posted by
MUDGEL
on 05 Nov, 2017 08:37
-
Like I said in my opening post as soon as i saw my words in writing I realised what an impractical and uneconomical venture it would be.
Still while ever it’s just noodling in my brain I’m safe.
-
#4 Reply
Posted by
Mr. Scram
on 05 Nov, 2017 08:50
-
Like I said in my opening post as soon as i saw my words in writing I realised what an impractical and uneconomical venture it would be.
Still while ever it’s just noodling in my brain I’m safe.
Running a business can be horrible in that you often need to kill your darlings to succeed.
-
#5 Reply
Posted by
pilleya
on 05 Nov, 2017 12:50
-
The assembly aspect would be nice and you have no chance of being able to get close to China PCB prices. You'd have to be able to match Chinas assembly prices which would he about $150 for 100 they can also get the passive components and connectors much much cheaper
. I'm looking at a small pick and place myself.
-
#6 Reply
Posted by
bd139
on 05 Nov, 2017 18:42
-
Reselling China with a guarantee and decent QA might work.
-
#7 Reply
Posted by
CM800
on 05 Nov, 2017 18:44
-
I wonder if there are any completely automated PCB manufacturing services using DLP technology for the mask, allowing you to scrap the need for masks.
-
#8 Reply
Posted by
IconicPCB
on 05 Nov, 2017 19:08
-
It's a shitfight ....from personal experience.
The market has been distorted by cheap asian products and services,
-
-
It's a shitfight ....from personal experience.
The market has been distorted by cheap asian products and services,
It's not a distortion. It is the market. If you feel it is just a distorition then you've not comprehended it correctly.
-
-
I belive we are at a point where the only way small manufacturers can bring their own costs down to compete with the likes of china, is to bring manufacturing in house. The cost saving is then in the fact that you can optimise for your product line, and you dont' have the costs associated with the knowledge transfer ( information ) between your company and the CM. Dont' under-estimate the cost in time it takes to sucessfully get all the information that is required from you to us.
It also is quite possible for you to access the low cost component markets and pcb markets that the chinese do. You can get ahead if you make sensible investment in your own plant and being super organised.
-
#11 Reply
Posted by
IconicPCB
on 06 Nov, 2017 01:54
-
mrpackethead,
while it is a reality out there ..it is never the less a distortion by the virtue of the fact that product manufactured in low labour cost and cheap money is being exported into a market with high labour costs and expensive money.
We had a thriving PCB industry prior to the bastardisation of the late 1990s thanks to Mr Soros and asian money market crash.
As for Bluskkuls assertion that only automation can save us... patently piffle. At the time i was selling Siemens automation. Asian factories at the time objected to automation saying that for the price of automation they could employ so many more labourers and be ahead .
Dont worry.. Chinese costs are going up too. In the mean time I invite You Blueskul to consider the cost of manufacturing in countries other than China.
What is the hourly rate of a process worker in china and how does it compare with their counterparts elsewhere in the world. How would income parity affect cost of finished goods in China versus other parts of the world.
-
-
mrpackethead,
while it is a reality out there
Distortion or what ever you want to call it, ignore it at your peril.
As for Bluskkuls assertion that only automation can save us... patently piffle.
its workign for me. Anythign and everything i can do to automate the process saves me money and lets me compete.
-
#13 Reply
Posted by
Mr. Scram
on 06 Nov, 2017 04:43
-
I don't think we have to worry too much. China's wages are rising at an alarming rate, so people there will start earning more realistic wages and competition will be adjusted accordingly.
-
#14 Reply
Posted by
MUDGEL
on 06 Nov, 2017 05:28
-
My original thinking was rather more of an approach like a cottage industry. That’s why I said niche.
There must be lots of hobbyists who would prefer some part done by someone else and not have to wait for weeks for shipping quite apart from any time spent working on the board itself.
I know because that’s what I was looking for. I wanted to build a board for use in a personal project but didn’t want all the etching etc. but when I looked I could get a board done cheaply but the time and cost of shipping was ludicrous. Failing any other options I did go the route of board made in China then ship to me for populating of the board and manufacture of the remaining package for housing the board and associated hardware.
That’s what got me thinking. It’s the waiting for the board, not too long but the shipping, China to Australia that killed me.
-
#15 Reply
Posted by
Circlotron
on 06 Nov, 2017 05:49
-
We Chinese doesn't give a shit if one has "rights" to survive. We only care about power. To reduce cost is power, to increase profit is power, to secure large orders is power, but anyway you have to have some special powers that others don't in order to survive.
Q.E.D.
Like for example selling poisoned milk to young children.
https://en.wikipedia.org/wiki/2008_Chinese_milk_scandal
-
-
but when I looked I could get a board done cheaply but the time and cost of shipping was ludicrous.
Double sided PCBs, 100x100mm 10 pces, courired on DHL to you in Australia for about USD$5.50 I say thats ludicruously cheap!
There is a market, but i'll tell you now its not with hobbyists!
-
#17 Reply
Posted by
Mr. Scram
on 06 Nov, 2017 06:12
-
Heard of Icarus? That's what happened when greedy went too far. The milk company's many higher ranked officers went to jail, and a few of them got the needle.
That to be said, that's nothing poisonous, it's just lack of nutrition. So to recap, those milk company employees, to cut cost, added too much water to milk. In order to pass nitrogen based protein content inspection, they added melamine, which is a plastic powder, to the milk to boost up nitrogen concentration.
It's not nearly toxic than other (in)famous Chinese food safety news, but it just has too much influence. In fact, it is not poisonous or toxic at all, it just lacks the nutrient for a baby to grow normally, hence resulted in malformed kids.
IMHO, those receiving the needle didn't necessarily deserve that. It's just the government made its voice that screwing up our next generation is not tolerated, hence they got the needle. If this happens to food that's not targeted for babies, they may well get just a couple of years of jail time in a minimum security facility.
My personal impression is that regulation in China isn't very effective or well observed. When problems arise from this, especially the ones that garner international attention, a heavy handed response can be expected from the government.
Would that be an unfair assessment?
-
-
Funny when i visit china, the thing that i've learnt is the best gift to take is NZ Milk powder.
-
#19 Reply
Posted by
Circlotron
on 06 Nov, 2017 07:03
-
-
-
Im glad this thread has gone from cottage etching of PCB to child food poisoning to which gifts to take to China.
-
#21 Reply
Posted by
Mr. Scram
on 06 Nov, 2017 07:14
-
-
#22 Reply
Posted by
MUDGEL
on 12 Nov, 2017 06:39
-
but when I looked I could get a board done cheaply but the time and cost of shipping was ludicrous.
Double sided PCBs, 100x100mm 10 pces, courired on DHL to you in Australia for about USD$5.50 I say thats ludicruously cheap!
There is a market, but i'll tell you now its not with hobbyists!
It cost me 3 times the cost of board and parts to ship via DHL. They charged a remote location surcharge but then handed the package onto the Australian Postal Service on arrival in Australia once it had passed customs. I have only twice been charged this ridiculous remote location fee and both times by Chinese suppliers using DHL. Eg a Linear Power Supply that cost me USD$54 with USD$73 shipping. Took 9 working days for a supposed courier service. 2 days to Melbourne then 7 working days to me less than 150klms from the sorting centre to my place.
Yet i can order electronic components from USA (Arrow) free shipping through FedEx for an order more than $20 and I get my goods inside a week. Order Monday Australia time and I have it my Friday mid morning. Door to door delivery. Can’t beat that.
-
#23 Reply
Posted by
NorthGuy
on 12 Nov, 2017 14:52
-
It cost me 3 times the cost of board and parts to ship via DHL. They charged a remote location surcharge but then handed the package onto the Australian Postal Service on arrival in Australia once it had passed customs. I have only twice been charged this ridiculous remote location fee and both times by Chinese suppliers using DHL. Eg a Linear Power Supply that cost me USD$54 with USD$73 shipping. Took 9 working days for a supposed courier service. 2 days to Melbourne then 7 working days to me less than 150klms from the sorting centre to my place.
Yet i can order electronic components from USA (Arrow) free shipping through FedEx for an order more than $20 and I get my goods inside a week. Order Monday Australia time and I have it my Friday mid morning. Door to door delivery. Can’t beat that.
I'm in the same position as you are, only in Canada. DigiKey/Mouser and the likes use FedEx, which works great. USB and DHL are expensive, deliver slow and have delivery problems to remote areas. They also can slap exuberant fees for collecting few dollars in taxes when crossing the border. Most Chinese companies can use ePacket - much cheaper, never a problem, and about the same delivery time.
-
#24 Reply
Posted by
iampoor
on 13 Nov, 2017 01:41
-
I can think of many small companies in the USA that would gladly pay a small CM to assemble boards at a reasonable price (ie, not 15$ each for 30 parts). Better buy prefaced boards from China and do assembly in house. Hint, the market is NOT hobbyists. Hobbyists don't usually pay for quality.