Hitachi v-555 50MHz oscilloscope operation manual

• Hitachi v-555 50MHz oscilloscope operation manual
  Posted by kid303 on 01 Aug, 2017 15:48
• hi there
  im new to this so forgive me if ive broken protocol with this thread, but ive just bought an Hitachi V-555 50 Mhz Oscilloscope and it comes without the operation manual and it is the first time ive ever used an oscilloscope, so being able to use it would be a real bonus.
  Does anyone out there by any chance have a copy of the manual i could grab that would be great.
  Ive looked online but cant find one.
  Your help woul be most appreciated.
  And Dave is right, I payed 30 quid with a fiver postage so thats a scope for 35 with probes.
  RESULT!
• #1 Reply
  Posted by tautech on 01 Aug, 2017 21:04
• Welcome to the forum.
  
  Here's some basic info if you can translate it:
  http://www.cienytec.com/medosciloscopio_analogo555.htm
  
  For the manual all I could find is what seems to be a generic Hitachi manual that seems to cover a # of models.
  Be sure to follow the instructions and get all parts.
  http://www.eserviceinfo.com/download.php?fileid=31141
  
  
• #2 Reply
  Posted by kid303 on 02 Aug, 2017 07:41
• cheers pb
  the spanish site has generic info which I have and the other site only downloads part 1 of two so therefor cannot be opened.
  thanks a lot for your help though
• #3 Reply
  Posted by tautech on 02 Aug, 2017 08:47
• Quote from: kid303 on 02 Aug, 2017 07:41

  cheers pb
  the spanish site has generic info which I have and the other site only downloads part 1 of two so therefor cannot be opened.
  thanks a lot for your help though
  

  The 2 parts are listed as 0 and 1, did you get them both ?
• #4 Reply
  Posted by kid303 on 03 Aug, 2017 02:06
• Hi pb
  no it just keeps giving part 1 every time time, really frustrating
• #5 Reply
  Posted by tautech on 03 Aug, 2017 03:51
• Quote from: kid303 on 03 Aug, 2017 02:06

  Hi pb
  no it just keeps giving part 1 every time time, really frustrating
  

  You need try again, get 0 first (Pt1) and then open another same eserviceinfo window. Leave the other window used for Pt1 open. Then select 1 (Pt2) and repeat the earlier process used.
  
  Worked here first time and I don't normally use eserviceinfo for manuals.
  
  Oh, and cut the pb......whatever that means.
• #6 Reply
  Posted by bjcuizon on 03 Aug, 2017 07:06
• Quote from: tautech on 03 Aug, 2017 03:51

  Oh, and cut the pb......whatever that means.
  

  Hehe, I guess he only saw your profile pic --the Pb part (lead symbol)
• #7 Reply
  Posted by kid303 on 03 Aug, 2017 08:10
• sorry tautech like the other guy said just saw the lead symbol.
  Ive tried loads of times it just gives me the same cant extract notice. im using keka to open it just gives me part 1 no part 0 and it wont extract if you can open it email me at danielbrowning1@gmail.com with a copy of it if poss coz i cant open the damn thing tried may times doesnt make sense.
• #8 Reply
  Posted by tautech on 03 Aug, 2017 08:47
• Quote from: kid303 on 03 Aug, 2017 08:10

  sorry tautech like the other guy said just saw the lead symbol.
  Ive tried loads of times it just gives me the same cant extract notice. im using keka to open it just gives me part 1 no part 0 and it wont extract if you can open it email me at danielbrowning1@gmail.com with a copy of it if poss coz i cant open the damn thing tried may times doesnt make sense.
  

  Sure, will do but my slow internet connection will take a while.
  
  Once I had both parts I put them in the same folder and double clicked part 1 then it installed both as a single pdf.
  
  Sending soon.