Hi all
Recieved this scope yesterday and it came with all options unlocked firmware 04.04 installed , could anyone tell me what I need to do to get the 100mhz unlocked as well please
Appreciate there’s lots of info about it , just looking for clarification and little help
Thanks
Gazmon
How many times have you tried already? Are you locked out yet?
It's sort of a rite of passage. Step by step instructions have already been posted many times, questions asked and answered many times. Sometimes people even share their serial numbers and get someone else to generate the key code on a locally run keygen instead of using the one on the web.
So... do you know the secret handshake?
Just kidding. You will get all the help you need.
The first thing to do is to check your serial number, both on the label on the back of the unit and in the complete System Info screen. I like to put the serial number into a text file on my computer, so that later on I can just copy-paste it somewhere useful... like into the keygen.
I’ve not tried anything yet
Ok can get that , what’s next the please
Sorry for being asking questions that probly been answered many times
Appreciate there’s lots of info about it , just looking for clarification and little help
What info have you seen so far?
Ok cheers will look at this today
Just one thing as my unit has already got all the official options from new can I just select the 100mhz option only or will this effect the rest
Is it better to go for the DSER option regardless ?
DSER covers all you need.
Ok cheers will look at this today
Just one thing as my unit has already got all the official options from new can I just select the 100mhz option only or will this effect the rest
Is it better to go for the DSER option regardless ?
It makes no difference. DSER enables everything.
Just done the upgrade all is looking good thanks
One thing I would like to ask is how do I get to view the intensity grading feature?
Just getting to grips with this scope, so apologies
One thing I would like to ask is how do I get to view the intensity grading feature?
Turn the knob labelled "intensity". You can also do it via the "display" menu. Section 12 of the manual has full details.
https://youtu.be/ETCOhzU1O5A?t=398
Hmm that doesn’t seem to give me the same results as the video?
No gradient just brighter lines
Hmm that doesn’t seem to give me the same results as the video?
No gradient just brighter lines
You probably don't have a varying/modulated input signal like Dave does.
The intensity grading is a viewable feature. The signal trace displays brighter in areas where the signal appears more often, so you need to be viewing a dynamic signal such as the envelope of an AM signal. You won't see it on a sine wave, for example.
Intensity grading is not the intensity knob.
The intensity grading is a viewable feature. The signal trace displays brighter in areas where the signal appears more often, so you need to be viewing a dynamic signal such as the envelope of an AM signal. You won't see it on a sine wave, for example.
Intensity grading is not the intensity knob.
Guessing thats why , im just hooked up to my signal gen, viewing a sine wave
Guessing thats why , im just hooked up to my signal gen, viewing a sine wave
Does your signal generator have AM?
well its just a cheap feeltech fy3200, I don't think it has AM , but correct me if im wrong
thanks for the replys