Thermal Imaging FLIR FSI Prism-DS Power Cord Lost/Damaged

• Thermal Imaging FLIR FSI Prism-DS Power Cord Lost/Damaged
  Posted by JayvinIrby on 03 Feb, 2023 20:05
• Hello,
  
  I have a FLIR FSI Prism-DS model of a thermal camera imaging device. The power cord is broken and lost. What is the best course of action to get this beast fired up again? Would you either try to repo a new power cord, build a new one or desperately try to fix the old one? Please help, it would mean so much. I attached a link to images of the thermal camera and its power socket below.
  https://drive.google.com/drive/folders/1LcZBItKn6TZqEsxPpQip-quelCZh6TBf?usp=sharing
  
  Thank you,
  Jayvin
• #1 Reply
  Posted by Fraser on 03 Feb, 2023 21:05
• I have sent you details of this Fischer Connector in response to your direct message 
  
  To assist others in the future, I will repeat the information here…..
  
  I believe it is a Fischer “Core” series 105A095 mixed connector …. 9 pin + 1 coax.
  
  Take a look here on page B5-16 (PDF page 165)
  
  https://pdf.directindustry.com/pdf/fischer-connectors/technical-specifications-2018-core-series-vol1/9158-764946.html
  
  You need to confirm with Fischer though.
  
  
  Fraser