Hi there,
I have accidentally discarded some electrical connectors which are still required. The original manufacturer of the equipment has since gone bust. At first I thought the connectors looked familiar and should be easy to replace but having spent 2 weeks solid searching I'm at a loss.. They look like JST or Molex range.
They are 2x5 pin plugs, rectangular with two chamfered corners and a locking latch. In the images you can see the plugs and receptacles, I'm only after the plugs.
Anyone have any idea?
Thanks in advance,
Mike
Some dimensions would be helpful.
The connector appears to be 6.5 X 13.25mm with a 2.54mm pitch. This was measured on a pair of calipers so may not be accurate to the .1 of a millimetre