Wanted: Hameg HM1507-3 Oscilloscope Service Manual

• Wanted: Hameg HM1507-3 Oscilloscope Service Manual
  Posted by White Elf on 01 Oct, 2011 08:58
• Hi Everyone,
  
  I am after a service manual, either PDF or Paper, for a Hameg HM1507-3 Analog/Digital Oscilloscope.  I already have the user manual.
  If anyone has one or knows where I can get hold of one it would be much appreciated.  I have spent quite a while searching online but have had no luck so far.
  
  Cheers,
  
  Scott
  
• #1 Reply
  Posted by david77 on 01 Oct, 2011 12:53
• I'd recommend contacting your local Hameg distributor or Hameg in Germany directly.
  They have been more than helpful to me in the past. They even sent me a copy of a
  service manual by post without charging for it.
  
• #2 Reply
  Posted by firewalker on 05 Oct, 2011 10:52
• Contact Hameg!
  
  They send the service manual I asked for! It is only in German though...
• #3 Reply
  Posted by david77 on 05 Oct, 2011 13:47
• I'm sure they also have English manuals, after all they sell their products around the world.
• #4 Reply
  Posted by firewalker on 05 Oct, 2011 15:51
• They said that they could find only a German one. It is an old CRO and the file is a pdf with scanned pages of a hard copy.
• #5 Reply
  Posted by White Elf on 18 Oct, 2011 01:43
• Thanks heaps guys.
  
  I will contact Hameg and see what they can offer.
  
  Cheers,
  
  Scott
  
• #6 Reply
  Posted by Peter1964 on 22 May, 2014 15:45
• Quote from: White Elf on 18 Oct, 2011 01:43

  Thanks heaps guys.
  
  I will contact Hameg and see what they can offer.
  
  Cheers,
  
  Scott
  

  
  Did you ever find a service manual in English?
  Do you know how old this model are?
  Is it any good compared to what one can get today?
  
  Reason I ask is because there are one for sale on a danish site, but the are asking around 200 EUR (275 USD)
  
  Regards Peter
• #7 Reply
  Posted by Neganur on 22 May, 2014 19:47
• It's a good scope, had a couple of those at the place where I did my vocational training.
  I don't think I'd pay 200 EUR for it though. It's 150 MHz, 200 MSa/s and has some kind of storage.
  Bit many knobs on the front that aren't always totally obvious.
• #8 Reply
  Posted by Patent.STM on 31 May, 2014 02:37
• i just found some a site yesterday with HM1507 service manual, google with keywords would lead you at the 1st page.
  seems don't have to pay, but only 2 files per day, make sure you download the right file.
  
  hm1507 is good, but the spring dial is......oops