I have a problem where, when I export gerber-files, most of my traces basically disappears and the manufacturer stops the design and says it has no traces. I have no idea of how to fix it. My traces are 0.4064 mm wide with the exception of a thicker one that do show up on the gerber. I get no DRC-errors and my rules are the default.
I attached some screenshots, hope someone can help.
My card in Eagle/Fusion
Top layer plane:
Bottom layer plane:
CAM preview in Eagle/Fusion
Top copper layer in CAM processor:
Top layer in manufacturer preview:
Card in manufacturer gerber-viewer:
Traces in KiCad gerber-viewer:
It would help to know the version of Eagle, the original file, and your traces are much too thin.
I have Eagle in Fusion 360 V2.0.9442. Which file do you mean? My traces are 0.4064 mm.
I also noticed that I get an error when I try to renumber the sheet or create a netlist:
Error: C:/Users/eljox/AppData/Local/Autodesk/webdeploy/production/0ec90c869b21f403f5768041793dee229e647b5c/Applications/Electron/LibEagle/examples/ulps/examples/renumber-sheet.ulp(21): error in constant
I reinstalled Fusion and it seems to be fixed now!